OSHA Basic Orientation Plus Test| Best for

What is the most frequently cited OSHA violation? - Answer Fall Protection What key elements are essential to recognizing hazards and reducing or eliminating workplace hazards? - Answer Management commitment and employee involvement You are encouraged to ask your coworkers/supervisor for information whenever you have a problem or are in doubt about what to do on a job? - Answer True It is your responsibility to follow all safety regulations, inform your employer of any unsafe condition; report all injuries no matter how minor they seem and wear the proper personal protective equipment? - Answer True The OSHA standard that addresses the requirements for preventing and lessening the results of a bad release of toxic, reactive, flammable, or highly explosive hazardous chemicals from a process - Answer Process safety management Standard The process Hazard Analysis (PHA) is one of the most important parts of the PSM program. PHAs are used to identify and evaluate major processes and ensure they are - Answer Evaluated, Controlled, and Identified In the PSM standard OSHA states employees must be trained if they work with highly hazardous chemicals. - Answer True Facilities are not permitted to control your entrance and exit in covered process areas. - Answer False What should be your first concern from the moment you enter the work site? - Answer Safety Under the Stop Work Authority, you have the right and obligation to stop a work activity if you have reason to believe your own safety or a coworkers safety is in jeopardy or if the work plan is not clearly established or understood . - Answer True What's needed in order to operate a plant-owned vehicle or mobile equipment while at a facility - Answer qualified only authorized only What type of work permits you may encounter on the job - Answer safe work permits confined space entry permits, hot work permits, line entry or line breaking permits, lockout/tagout permits if you are replacing a piece of equipment the new one should be the same as the one being removed. If its not you should find out whether the change was on purpose. what is this called - Answer Management of change Used only where an immediate life threatening hazard exists - Answer Danger Used where immediate non life threatening hazards exist - Answer Warning Sign Used to warn against potential hazards or to caution against unsafe practices - Answer Caution sign