• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 3 fuera de 26 páginas
Examen

XI_PHYSICS_New_Chapter_8_Mechanical_Properties_of_Solids_340_Statement

Document preview thumbnail
Vista previa 3 fuera de 26 páginas

XI PHYSICS New XI_PHYSICS_New_Chapter_8_Mechanical_Properties_of_Solids_340_Statement

Vista previa del contenido

XI_PHYSICS_NEW CHAPTER_8 MECHANICAL PROPERTIES OF SOLIDS
XI_PHYSICS_NEW CHAPTER_8 MECHANICAL PROPERTIES OF SOLIDS
8.1 INTRODUCTION
S# False Statement True Statement
Solid objects are not perfectly rigid; they can deform under
1 All solid objects are perfectly rigid.
external forces.
Elastic deformation always leads to Elastic deformation is temporary and reverses when the
2
permanent changes in shape. force is removed.
3 Steel is a perfect plastic material. Steel is not a plastic material; it exhibits elastic behavior.
Glass is ductile and can be stretched
4 Glass is brittle and cannot be stretched into wires.
into wires.
Hooke's law states that deformation Hooke's law describes a linear relationship between
5 is always proportional to the applied deformation and force but not always a direct
force. proportionality.
Plastic deformation is always Plastic deformation is generally irreversible, unlike elastic
6
reversible. deformation.
The shape of a railway track is Railway tracks have a specific cross-sectional shape for
7
designed to resemble the letter 'I'. stability and efficient train movement.
An aeroplane's strength is inversely An aeroplane's design involves a complex trade-off between
8
proportional to its weight. weight and strength.
Artificial limbs are heavier and less Artificial limbs can be designed to be lighter and stronger
9
strong than natural limbs. than natural limbs.
Plastic materials always return to Plastic materials do not always return to their original shape
10
their original shape. after deformation.
Elasticity plays no role in the design
Elasticity is crucial in bridge design to withstand dynamic
11 of bridges, as they are meant to be
loads and deform without permanent damage.
rigid.




1 OF 26 RI_Best Wishes

, XI_PHYSICS_NEW CHAPTER_8 MECHANICAL PROPERTIES OF SOLIDS
XI_PHYSICS_NEW CHAPTER_8 MECHANICAL PROPERTIES OF SOLIDS
8.2 STRESS AND STRAIN
S# False Statement True Statement
Stress and strain are always directly
Stress and strain are proportional within the elastic limit for
proportional, regardless of the
1 most materials, but this proportionality may not hold for all
material, leading to consistent
materials or under extreme conditions.
deformation.
Hydraulic stress in a fluid does not Hydraulic stress can lead to uniform compression of a solid
2 affect the shape of a solid object object submerged in a fluid, causing changes in its shape and
submerged in it. volume.
Longitudinal strain is the same as Longitudinal strain is the change in length of a material
3 shearing strain, and they have divided by its original length, while shearing strain is the
identical definitions. angular displacement of a material due to tangential forces.
Stress is measured in Newtons per
The unit of stress is Newtons per square meter (N/m^2) or
square meter (N/m^2) for all
4 Pascals (Pa), but different materials may have different stress
materials, regardless of their
units depending on their properties.
properties.
Stress is the restoring force per unit
area developed in a body when it's Stress is the restoring force per unit area developed in a body
5 subjected to a deforming force, and when it's subjected to a deforming force. While it's related to
it's always equal in magnitude to the the applied force, it's not always equal in magnitude.
applied force.
Shearing strain is defined as the Shearing strain is defined as the ratio of the relative
6 ratio of the change in volume (ΔV) to displacement (Δx) between opposite faces of a material to
the original volume (V) of a material. the original length (L) of the material.
Hydraulic stress is the internal
Hydraulic stress is the pressure exerted by a fluid on the
restoring force developed in a solid
7 surface of a solid object when it is uniformly compressed by
sphere when it's uniformly
the fluid. It is not an internal restoring force.
compressed on all sides by a fluid.
The volumetric strain of a material is dimensionless, as it
The volumetric strain of a material
8 represents a ratio of changes in volume to the original
has no units or dimensional formula.
volume.
Tensile stress always results in a Tensile stress can either increase or decrease the length of a
9
decrease in the length of a material. material, depending on its properties and the applied force.
Tangential stress is the same as the
restoring force developed in a Tangential stress is the restoring force per unit area
10
material when it's stretched or developed in a material due to shearing forces.
compressed.
Volume strain is the change in shape Volume strain is the change in volume of a material when it's
11 of a material when it's subjected to subjected to external forces, without a change in its
external forces. geometrical shape.
Stress is defined as the change in the
Stress is the internal resistance or restoring force per unit
shape of a body when forces are
12 area in a body subjected to external forces, regardless of
applied to it, and it is always visually
whether the deformation is visible or not.
noticeable.
Tensile stress and compressive Tensile stress involves stretching a material, while
13 stress are the same and can be compressive stress involves compressing it. They are distinct
interchangeably used. and not interchangeable.
2 OF 26 RI_Best Wishes

, XI_PHYSICS_NEW CHAPTER_8 MECHANICAL PROPERTIES OF SOLIDS
Shearing strain involves angular displacement and relative
Shearing strain is the same as displacement between opposite faces of a body, while
14
longitudinal strain. longitudinal strain is related to the change in length along
the direction of the applied force.
Hydraulic stress is associated with the uniform compression
Hydraulic stress is the same as
15 of a body in a fluid, while tensile stress involves stretching a
tensile stress.
material.
In the case of hydraulic
compression, the internal restoring In the case of hydraulic compression, the internal restoring
force per unit area is known as force per unit area is known as hydraulic stress, and it is
16
hydraulic stress, and it is equal in equal in magnitude but opposite in direction to the applied
magnitude to the hydraulic pressure hydraulic pressure.
applied.
Shearing stress is always equal to
When tangential forces act on a body, they can generate
17 zero when a body is subjected to
shearing stress, causing a change in shape or deformation.
tangential forces.
The volumetric strain is always Hydraulic compression can lead to volumetric strain, which
18 equal to zero when a solid is under involves a change in the volume of the material without
hydraulic compression. altering its shape.
Stress is the force applied to a material, and it can lead to
Stress is the force that causes a body
19 deformation, which may result in stretching or compression,
to shrink.
depending on the type of stress and material properties.
Stress and strain are the same thing Stress is a measure of internal force per unit area, while
20 and can be used interchangeably in strain quantifies the deformation in a material. They are
physics. related but not interchangeable.
Tensile stress occurs when a material is stretched or
Tensile stress occurs when a
21 elongated, while compressive stress occurs when a material
material is compressed.
is compressed or shortened.




3 OF 26 RI_Best Wishes

Información del documento

Estudio
Subido en
23 de junio de 2024
Número de páginas
26
Escrito en
2023/2024
Tipo
Examen
Contiene
Preguntas y respuestas
$8.49

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
DoctorHkane
4.5
(393)
Vendido
817
Seguidores
171
Artículos
23217
Última venta
1 semana hace



Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes