HEAT TRANSFER
• Heat energy is transferred from one place to another or one end to
another end of a substance.
• These three modes are conduction, convection and radiation.
• For conduction and convection modes a material medium is necessary
But for radiation mode material medium is not necessary.
• The heat energy coming from the sun to the earth is by radiation mode.
Conduction
us
Pl
• Conduction is possible in solids, liquids and gases.
• But it is best in solids Substances which conduct heat are called good
e
0) ac
conductors and which do not are called poor conductors or insulators.
45 i R
All metals are good conductors.
31 ar
• Gases and non-metals are poor conductors. Asbestos, rubber, fibre glass
13 ak
etc are some examples of non-metals. Silver is the best conductor.
06 h
• Transfer of heat from one place to another or one end (hot end) to the
Sa
other end (cold end) of the substance, by the assistance of its particles,
but without their actual movement is called conduction.
(9
• When a substance is heated, the atoms of the substance begin to vibrate
a
im
with greater amplitudes.
ah
• These increased vibrational amplitudes and thus the energy associated
M
with them are passed from atom to atom (or molecule to molecule).
• Then there is an increase in temperature from point to point.
• Once the temperature of the regions or points becomes constant, we
say that the steady-state is reached.
, The quantity of heat (Q) flowing through a
substance depends on
a) its area of cross section (A).
b) temperature gradient
c) time (t) for which the heat flows and
d) the nature of the material of the substance
• where the constant of proportionality, K, is called the Thermal
Conductivity (TC) of the material.
• Thermal Conductivity of a material is defined as the quantity of
us
heat flounng through unit area of cross section of the material
Pl
in unit time under unit temperature
e
0) ac
• Greater the value of K for a material, the more rapidly will
45 i R
conduct heat.
31 ar
• Large thermal conductivities of good thermal conductors such
13 ak
as metal.
06 h
Sa
• Small thermal conductivities are good thermal conductors such
as wood and glass wool.
(9
• Small cooking pots have copper coating on the bottom, being a
a
im
good conductor of heat, copper promotes the distribution of
ah
heat over the bottom of a pot for uniform
M
• Plastic foams, are good insulators because they contain pockets
of air.
• Gases are poor conductors and low thermal conductivity of air.
• Heat energy is transferred from one place to another or one end to
another end of a substance.
• These three modes are conduction, convection and radiation.
• For conduction and convection modes a material medium is necessary
But for radiation mode material medium is not necessary.
• The heat energy coming from the sun to the earth is by radiation mode.
Conduction
us
Pl
• Conduction is possible in solids, liquids and gases.
• But it is best in solids Substances which conduct heat are called good
e
0) ac
conductors and which do not are called poor conductors or insulators.
45 i R
All metals are good conductors.
31 ar
• Gases and non-metals are poor conductors. Asbestos, rubber, fibre glass
13 ak
etc are some examples of non-metals. Silver is the best conductor.
06 h
• Transfer of heat from one place to another or one end (hot end) to the
Sa
other end (cold end) of the substance, by the assistance of its particles,
but without their actual movement is called conduction.
(9
• When a substance is heated, the atoms of the substance begin to vibrate
a
im
with greater amplitudes.
ah
• These increased vibrational amplitudes and thus the energy associated
M
with them are passed from atom to atom (or molecule to molecule).
• Then there is an increase in temperature from point to point.
• Once the temperature of the regions or points becomes constant, we
say that the steady-state is reached.
, The quantity of heat (Q) flowing through a
substance depends on
a) its area of cross section (A).
b) temperature gradient
c) time (t) for which the heat flows and
d) the nature of the material of the substance
• where the constant of proportionality, K, is called the Thermal
Conductivity (TC) of the material.
• Thermal Conductivity of a material is defined as the quantity of
us
heat flounng through unit area of cross section of the material
Pl
in unit time under unit temperature
e
0) ac
• Greater the value of K for a material, the more rapidly will
45 i R
conduct heat.
31 ar
• Large thermal conductivities of good thermal conductors such
13 ak
as metal.
06 h
Sa
• Small thermal conductivities are good thermal conductors such
as wood and glass wool.
(9
• Small cooking pots have copper coating on the bottom, being a
a
im
good conductor of heat, copper promotes the distribution of
ah
heat over the bottom of a pot for uniform
M
• Plastic foams, are good insulators because they contain pockets
of air.
• Gases are poor conductors and low thermal conductivity of air.