Boilermaker test || 100% correct.

Which organization requires a person to be trained in order to operate personal lifting equipment correct answers OSHA Where would the usage of a RTJ gasket be found correct answers High pressure system All of the following are examples of internal manway hardware except correct answers Slide fastener What typeof wrench measures how much a fastener is being tightened correct answers torque The fitting that makes it easy to disassemble threaded piping is correct answers union What is the purpose of a gasket correct answers to create a seal between 2 stationary parts What is the 1st consideration when making a gasket correct answers Material compatibility In order to get the bundle to line up with the shell side gasket the best too to use to lift the bundle is a correct answers Drift pin How often should you inspect any type of rigging correct answers before each use Ring gaskets may be affected by all of the following except correct answers number of bolts CHAIN slings should be visually inspected correct answers annually Which way should the teeth face on a hack saw blade correct answers away from the handle To prevent injury due to crushing between cranes and other objects what must be used correct answers barricades which is true when comparing head pressure if a 1" pipe and a 10" pipe when both are 20' tall correct answers the pressure is the same When making a threaded connection the fitting stops on the 2nd thread the next step is correct answers STOP something is wrong When using a sealing ring on a heat exchanger what material is used to seal off in between the floating tube sheet correct answers permatex For duct sections bolted together there is usually some kind of seal or correct answers gasket The end of a tube in an exchanger has been smashed, this is caused by all of the following except correct answers the partition plate being too short Which of the following should be removed when pressure testing the vessel correct answers relief valve