Tattoo Machine (with solved solutions)

Springs correct answers Allow the needle to bounce up and down, penetrating the skin contacts correct answers Allow for complete electrical current when connected Contact caps correct answers Cover the contact points to allow them to be flush for better connectivity Soldering lug correct answers Where the wires are soldered, allowing for better contact Binding Post correct answers Holds contact screw and allows it to be adjusted machine frame correct answers Keeps the machine steady and holds the pieces together Band hook correct answers Where the rubber bands are held secure Needle bar correct answers Holds the number of needles needed for the work Needle tube correct answers Protech's the needle bar TUBE CAP correct answers Covers the tip of the needle tube Armature bar correct answers Holds the needle bar and drives it up and down Machine coil correct answers Determines the amount of power the machine has Screws and washers correct answers Hold the various parts together Capacitor correct answers Holds extra charge in a battery set up Rubber bands correct answers Help hold the pieces in place and keep them steady A modern tattoo machine can cycle the needle up to correct answers 150 times each second Three categories of tattoo machines correct answers 8 coil , 10 coil , 12 coil In a tattoo machine what holds electrical charge correct answers The coils An 8 coil machine is used for correct answers Fine outlining A 10 coil machine is generally used for correct answers Heavier outlining or small areas of shading 12 coil machine is used for correct answers Shading large areas of the skin with minimal resistance