6.1 Haas Control Keypad & Screen - Basic Mill Operator
The Haas Control is the computer system that runs the Haas machine. - ANS True The Reset key does the following: - ANS Clears alarms, clears text, and resets the control for machine operation Any time you have pressed the E-Stop button, you will need to rotate it clockwise to disengage it, and then press Reset to exit the E-Stop state and reset the machine. - ANS True When you start the machine, pressing the Power Up key does what? - ANS Zero returns the axes and gets the control ready to go If the machine gets interrupted during a tool change, the machine cannot run until the tool change is completed. Pressing the Recover key allows the machine to complete the tool change, and return the tool changer to Home position. - ANS True One of the tool release buttons is located on the control keypad. The other tool release button is located: - ANS Right above the spindle and coolant line, on the spindle head cover The Display and Mode section of the control keypad is what you see in the upper two quadrants of the display screen on the control. - ANS True The first button to review in the Display section is the Program Button. This button shows the operator: - ANS Information related to the Active Program that is loaded into Memory, and visible in the upper left side of the control window
Información del documento
- Subido en
- 17 de mayo de 2024
- Número de páginas
- 2
- Escrito en
- 2023/2024
- Tipo
- Examen
- Contiene
- Preguntas y respuestas
