• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 1 fuera de 2 páginas
Examen

5.1 Start Running A Program - Basic Mill Operator Questions & Answers Solved 100% Correct!

Document preview thumbnail
Vista previa 1 fuera de 2 páginas

Watching the Haas Certification videos is a good first step to learning the basics about CNC machines. However, there is nothing better than hands-on experience. Be sure to contact _____________ to arrange time in front of a Haas CNC machine. - Answer-Your local Haas Factory Outlet The first number you will see in the program that is running in the control is: - Answer-The program number, or O number. This can have 5 numerals following the letter O. The second line of text and code in the program is commonly: - Answer-The drawing number and revision of the programmed part Often, the list of cutting tools needed for this particular program will be listed. - Answer-True When the Operator is going to run the first part of a batch of parts, they should: - Answer-Slow down the operation of the machine for the first part in the batch What feature on the control panel allows you to slowly advance, one line at a time, through the program? - Answer-Single Block key What keys on the control panel allow the Operator to change the speed of the rapid movements in the program? - Answer-The Rapid Override key What is the preferred Rapid Override speed when you are running your first part in a batch? - Answer- 25% The Operator can make the necessary adjustments to the feedrate or the spindle override keys without his Supervisor's approval or request. - Answer-FalseAt times, the Operator may need to turn off the coolant when reviewing the machine setup. If you need to turn off the coolant, be sure to turn it back on when the machine starts running production parts again. - Answer-True When the production parts start running, it is OK to walk away from the machine. - Answer-False Another important aspect of checking your machine when the tool is cutting the workpiece is: - AnswerThe sound the cut is making on the part. In general, the tone of a good cut should be a uniform, low tone. It is important to look at the cut surface of the workpiece in the machine. A sudden change in this surface finish appearance may be a sign that something is wrong. - Answer-True


Información del documento

Subido en
14 de mayo de 2024
Número de páginas
2
Escrito en
2023/2024
Tipo
Examen
Contiene
Preguntas y respuestas
$8.49

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
Brainarium
3.8
(344)
Vendido
2090
Seguidores
1050
Artículos
24652
Última venta
1 día hace




Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes

Ups! No podemos cargar tu documento ahora. Inténtalo de nuevo o contacta con soporte.