Water restoration technician Questions & Answers(SCORED A)

Water restoration technician Questions & Answ Restorative drying is a process used to recover from many forms of water intrusion by - ANSWERAssessment documentation control dryeing selective replacement The systems of drying Have been detailed in several key documents including the I RCRCS 500 standard in reference guide for professional water damage restoration - ANSWERStandard of care The goal of the restoration process is to transform an abnormal with potentially damage structure into environment that can be real occupied of legal or better appearance and cleanliness that before the intrusion occurred to do so in the most - ANSWEREconomical and efficient means possible The restore begins this Process By identifying all affected materials water must be tracked from its initial source and diligently followed in every direction it migrated to establish your an accurate perimeter once the perimeter is identified at the restore then document what type of materials have been - ANSWERAffected Affected materials are evaluated against three criteria to determine if they should be restored or replacedThe three criteria are - ANSWERDegree of contamination damage to the item replacement cost versus restoration cost After identifying the material and considering contamination damage and caused the restored decides which material should be dried in which material should be replaced in addition to the restore will also decide which method of drawing should be used including - ANSWERDrained aggressively disruptive All materials that are determined restorable are inspect it further and the amount of moisture absorbed by the material is - ANSWERMeasured and documented Dream process is noted during daily Monitoring visits the restore asks is it drying while comparing two sets of data on the first and second set of data recorded on the ers(SCORED A)