GSOC OSHA 511 Questions with well explained answers

What is OSHA's mission? - To protect the safety and health of America's workers What can be a result of a workplace injury or illness? - Lower morale and increased costs When does a horizontal standard apply? - When a condition does not apply to a specific industry or type of equipment What is section 11(c) of the OSH Act? - The right of workers to seek safety and health on the job without fear of punishment OSHA requires that employers certify that abatement is complete of each cited violation - True OSHA conducts inspections by priority, what is the order of that priority? - a. Imminent danger b. Fatalities/Catastrophes c. Complaints/referrals d. Programmed inspections The inspection process includes? - a. Presentation of credentials b. opening conference c. inspection/walk around d. closing conference What is an incidence rate in OSHA recordkeeping? - The number of recordable injuries and illnesses per 100 full-time workers The purpose of the OSHA 300 log is to... - Record work related fatalities, injuries, and illnessesOSHA's safety and health management guidelines include: - BOTH - management commitment and employee involvement How can a manager show his/her commitment to safety and health? - Being an example by knowing and following the rules employees are expected to follow What is the order of effectiveness in hazard abatement? - a. Elimination b. Engineering Controls c. Administrative Controls PPE This standard ensures that chemical products are evaluated and that hazard information is transmitted to employers and employees - Hazard Communication OSHA's term for airborne contaminants which tells you the legally allowed concentration in the work place is? - PEL - Permissible exposure limit An audio-dosimeter is used to measure an employee's ___ noise exposure? - TWA - timeweighted average Standard 1910.21: A gap or open space in a wall, partition, vertical walking/working surface, or similar surface that is at least 30 inches (76cm) high and at least 18 inches (46cm) wide, through with an employee can fall to a lower level? - Opening Which of the following shall guard every stairway floor opening? - Standard railing built according to standard How high should the top rail be? - 42" Struck by: permanent aisles and passageways should be appropriately marked and be - Kept clear and in good repairWhich of the following is not a basic means of safeguarding machinery - PPE Match types of fires: - a. A - Normal combustibles b. B - Flammable liquids c. C - Electrical D - Combustible metals Compressed gases are regulated by OSHA and what other government agency - DOT When are cages or wells needed with fixed ladders? - When the ladder is more than 20 feet to a maximum unbroken length of 30 feet When providing employees adequate safety during an emergency - what is the most important factor to consider? - Adequate number of exit routes What is the maximum number of employees allowed when the emergency action plan is communicated orally? - 10 Fire extinguishers for Class A fires shall be located no more than _ in travel distance from the employees - 75 feet What differentiates the four categories of a flammable liquid - Flashpoint and boiling point What are the most common hazards associated with conveyors? - Nip points and rotating parts Eye, head, and foot PPE must comply with which of the following? - National Consensus standards Who pays for OSHA required PPE? - Employer