Basic HVACR 100 Final Exam Complete Solutions
Basic HVACR 100 Final Exam Complete Solutions True or False: Refrigeration systems are designed to operate with only refrigerant and oil in the system ️True Air contains three non-condensibles that are detrimental to the system ️Air, nitrogen, moisture A compound guage is used to measure vacuum level ️Low side/ blue gauge Molecular motion stops at what degree Fahrenheit? ️-460 degrees The law of conservation states that energy can neither be_____ or ______. ️created or destroyed Define a British thermal unit (Btu) ️The amount of heat required to raise one pound of water one degree at sea level True or False:Heat flows naturally from a colder substance to a warmer substance ️False Conduction heat transfer can be explained as the energy traveling from one _____ to another ️Molecule There are two kinds of heat, what are they ️Latent heat and sensible heat What is the atmospheric pressure at sea level ️14.696 or 15 psi Temperature that can be measured is known as ______ heat ️sensible True or False:We take heat from where it is not wanted and release it where it doesn't matter, this describes the refrigeration process ️True Matter is commonly explained as a substance that occupies ____ and has _____ ️space and has mass Matter exists in three states , name them ️Solid , liquid , and vapor / gas True or False:Electrical energy and heat energy are two forms of energy used in this industry ️True Vapor exerts pressure in what direction, a) outward, b) upward, c)downward, d) b and c, e) all of the above ️e) all of the above True or False: The greater the temperature difference between two objects, the faster the heat transfer ️True What are the three temperature ranges of refrigeration? ️High, medium, low The evaporator in a refrigeration system is responsible for_______ into the system from whatever medium is to be cooled. ️absorbing heat The evaporator is responsible for removing _______ and ______ heat. ️latent and sensible Two important factors in understanding refrigeration are ______ and ______ . ️boiling temperature and condensing temperature The evaporator must be ______ than the medium to be cooled to have a heat exchange. ️cooler Refrigerant in the evaporator __________ . ️changes from a liquid to a vapor The heat that is added to a vapor after all the liquid has boiled off is referred to as _____ . ️superheated When an evaporator experiences a heat-load increase, the suction pressure _____. ️increases True or False: Some evaporators have single circuits and some have multiple circuits. ️True When the refrigerated space has been allowed to warm up considerably or is first started, this is called a _____ _____. ️hot pulldown True or False: The boiling temperature of the liquid refrigerant determines the coil operating temperature. ️True When the evaporator removes heat from the air and lowers the temperature, sensible heat is removed. When moisture is removed from air, ____ is removed. ️latent heat True or False: Multi-circuit evaporators are used when the coil would become too long for a single circuit. ️True True or False: For heat to travel from a cool substance to a warm substance, work must be performed. The motor that drives the compressor in the refrigeration cycle does this work. ️True A medium temperature refrigeration box operates within what temperature range? ️28⁰ - 40⁰ F True or False: The condenser is the component that absorbs heat into the refrigeration system. ️Fa
Información del documento
- Subido en
- 20 de abril de 2024
- Número de páginas
- 5
- Escrito en
- 2023/2024
- Tipo
- Examen
- Contiene
- Preguntas y respuestas