NET + n10-008 / N10 008/ NET + n10-008 Test Prep (200Q&A) with Complete Solution 2024.

NET + n10-008 / N10 008/ NET + n10-008 Test Prep (200Q&A) with Complete Solution 2024. Which of the following organizations developed the Open Systems Interconnection? (OSI) model? A. International Telecommunication Union (ITU-T) B. Comité Consultatif International Télégraphique et Téléphonique (CCITT) C. American National Standards Institute (ANSI) D. Institute of Electrical and Electronics Engineers (IEEE) E. International Organization for Standardization (ISO) - ANSWER E. ISO developed and published the OSI model to serve as a conceptual model for software and hardware developers. The ITU-T, formerly known as the CCITT, coordinates the development and advancement of international telecommunication networks and services. ANSI is a private organization that administers and coordinates a United States-based standardization and conformity assessment system. The IEEE publishes standards that define data link and physical layer standards. These standards are referred to collectively as the 802 series At which of the following layers of the Open Systems Interconnection (OSI) model do the protocols on a typical local area network (LAN) use media access control (MAC) addresses to identify other computers on the network? A. Physical B. Data link C. Network D. Transport - ANSWER B. The Ethernet (or IEEE 802.3) protocol at the data link layer uses MAC addresses to idenitify computers on the local network. MAC addresses are coded into the firmware of physical network interface adapters by the manufacturer. The physical layer deals with signals and is not involved in addressing. The IP protocol at the network layer has its own addressing system. The transport layer protocols are not involved in addressing. Which layer of the Open Systems Interconnection (OSI) model is responsible for the logical addressing of end systems and the routing of datagrams on a network? A. Physical B. Data link C. Network D. Transport E. Session F. Presentation G. Application - ANSWER C. Network layer protocols (such as IP) contain headers that specify logical addresses for end system communication and route datagrams across a network. The physical layer defines standards for physical and mechanical characteristics of a network. The data link layer uses media access control (MAC) or hardware addresses, not logical addresses. The transport layer uses port numbers, not logical addresses. Session layer protocols create and maintain a dialogue between end systems. Presentation layer protocols are responsible for the formatting, translation, and presentation of information. The application layer provides an entry point for applications to access the protocol stack and prepare information for transmission across a network. On a TCP/IP network, which layers of the Open Systems Interconnection (OSI) model contain protocols that are responsible for encapsulating the data generated by an application, creating the payload for a packet that will be transmitted over a network? (Choose all that apply.) A. Physical B. Data link C. Network D. Transport E. Session F. Presentation G. Application - ANSWER B, C, D. Before the payload data generated by an application can be transmitted over a TCP/ IP network, the system must encapsulate it by applying protocol headers and footers at three layers of the OSI model. The data link layer applies a header and footer to create an Ethernet frame. The network layer applies a header to create an IP datagram. The transport layer applies a TCP or UDP header to create a segment or datagram. The other model layers are involved in the payload transmission process, but they do not encapsulate the payload. What layer of the Open Systems Interconnection (OSI) model is responsible for translating and formatting information? A. Physical B. Data link C. Network D. Transport E. Session F. Presentation G. Application - ANSWER F. The presentation layer implements functions that provide formatting, translation, and presentation of information. No other layers of the OSI model translate and format application data. Which of the following devices typically operates at the network layer of the Open Systems Interconnection (OSI) model? A. Proxy server B. Hub C. Network interface adapter D. Router - ANSWER D. A router connects networks at the network layer of the OSI model. Proxy servers operate at the application layer. Network interface adapters operate at both the data link and the physical layers. Hubs are physical layer devices. Which layer of the Open Systems Interconnection (OSI) model provides an entrance point to the protocol stack for applications? A. Physical B. Data link C. Network D. Transport E. Session F. Presentation G. Application - ANSWER G. The application layer provides an entry point for applications to access the protocol stack and prepare information for transmission across a network. All other layers of the OSI model reside below this layer and rely on this entry point. Which layer of the Open Systems Interconnection (OSI) model is responsible for dialogue control between two communicating end systems? A. Physical B. Data link C. Network D. Transport E. Session F. Presentation G. Application - ANSWER E. The session layer is responsible for creating and maintaining a dialogue between end systems. This dialogue can be a two-way alternate dialogue that requires end systems to take turns transmitting, or it can be a two-way simultaneous dialogue in which either end system can transmit at will. No other layers of the OSI model perform dialogue control between communicating end systems Some switches can perform functions associated with two layers of the Open Systems Interconnection (OSI) model. Which two of the following layers are often associated with network switching? (Choose all that apply.) A. Physical B. Data link C. Network D. Transport E. Session F. Presentation G. Application - ANSWER B, C. The primary function of a switch is to process packets based on their media access control (MAC) addresses, which makes it a data link layer device. However, many switches can also perform routing functions based on IP addresses, which operate at the network layer.