• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 2 fuera de 10 páginas
Examen

EPA 608 Type II Sample Test Questions.

Document preview thumbnail
Vista previa 2 fuera de 10 páginas

EPA 608 Type II Sample Test Questions. Before charging a new system with refrigerant, what should be done? Pressurize with nitrogen (classified as an inert gas) and leak Which refrigerant can be used for leak detection as a trace gas and pressurized with nitrogen? R-22 What tools can you use to find general area of leaks and pinpoint leaks? a. Soap bubbles. b. Look for oil residue c. Electronic or ultrasonic leak detector will provide the general area of the leak d. Refrigerant dye c. Electronic or ultrasonic leak detector will provide the general area of the leak Traces of oil around a sight glass inlet fitting of a refrigeration system might be the indication of: a. A leak b. Excessive oil in the system c. An overcharge d. A restriction at the TXV a. A leak Describe ways you can visually look for leaks. a. Using soap bubbles b. Looking for traces of oil c. Excessive superheat, caused by low refrigerant charge d. All the above d. All the above Type II classification, as identified by EPA, applies to what equipment? a. Small appliances with five (5) pounds of refrigerant or less b. Refrigerators, freezers, and vending machine appliances c. Low pressure appliances d. Split air conditioning equipment with five (5) pounds of refrigerant or more d. Split air conditioning equipment with five (5) pounds of refrigerant or more

Vista previa del contenido

EPA 608 Type II Sample Test Questions.
Before charging a new system with refrigerant, what should be done?

Pressurize with nitrogen (classified as an inert gas) and leak

Which refrigerant can be used for leak detection as a trace gas and pressurized
with nitrogen?

R-22

What tools can you use to find general area of leaks and pinpoint leaks?
a. Soap bubbles.
b. Look for oil residue
c. Electronic or ultrasonic leak detector will provide the general area of
the leak
d. Refrigerant dye

c. Electronic or ultrasonic leak detector will provide the general area of
the leak

Traces of oil around a sight glass inlet fitting of a refrigeration system might be
the indication of:
a. A leak
b. Excessive oil in the system
c. An overcharge
d. A restriction at the TXV

a. A leak

Describe ways you can visually look for leaks.
a. Using soap bubbles
b. Looking for traces of oil
c. Excessive superheat, caused by low refrigerant charge
d. All the above

d. All the above

Type II classification, as identified by EPA, applies to what equipment?
a. Small appliances with five (5) pounds of refrigerant or less
b. Refrigerators, freezers, and vending machine appliances
c. Low pressure appliances
d. Split air conditioning equipment with five (5) pounds of refrigerant
or more

d. Split air conditioning equipment with five (5) pounds of refrigerant
or more

, What are the leak repair requirements for comfort cooling appliances and commercial Appliances
containing 50 lbs. or more of refrigerant?
a. Must be repaired if leak rate exceeds 15% in comfort cooling appliances.
b. Must be repaired if leak rate exceeds 35% in all commercial and industrial
process refrigeration\
c. a and b
d. None of the above

c. a and b

What type of refrigerant was the most common before outlawing CFCs and
HCFCs?
a. R-12
b. R-22
c. R-500
d. R-134A

b. R-22

The required level of evacuation for recovery equipment manufactured after
November 15, 1993, on a system containing less than 200 pounds of R-12
refrigerant is:
a. 0 inches Hg
b. 4 inches Hg
c. 10 inches Hg
d. 15 inches Hg

c. 10 inches Hg

What is the purpose of the filter drier and when should it be changed?
a. To filter the oil. Change every year.
b. To remove moisture from the refrigerant, replace on a routine basis
or anytime a system is opened
c. Cleans the air. Replace monthly
d. Dryer's air filters. Replace yearly

b. To remove moisture from the refrigerant, replace on a routine basis or anytime a system is opened

Industrial process and commercial refrigeration equipment with over 50 pounds
of refrigerant with an annual leak rate of ___ % requires repair under EPA
regulations.
a. 0
b. 15
c. 35
d. 50

c. 35

Información del documento

Subido en
21 de marzo de 2024
Número de páginas
10
Escrito en
2023/2024
Tipo
Examen
Contiene
Preguntas y respuestas
$13.99

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
ACADEMICAIDSTORE
4.1
(176)
Vendido
1224
Seguidores
894
Artículos
12820
Última venta
1 mes hace



Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes