• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 4 fuera de 113 páginas
Examen

CPCCSF2004 Assessment PRACTICAL

Document preview thumbnail
Vista previa 4 fuera de 113 páginas

The purpose of this checklist The pre-assessment checklist helps students determine if they are ready for assessment. The trainer/assessor must review the checklist with the student before the student attempts the assessment task. If any items of the checklist are incomplete or not clear to the student, the trainer/assessor must provide relevant information to the student to ensure they understand the requirements of the assessment task. The student must ensure they are ready for the assessment task before undertaking it. Section 1: Information for Students Make sure you have completed the necessary prior learning before attempting this assessment. Make sure your trainer/assessor clearly explained the assessment process and tasks to be completed. Make sure you understand what evidence is required to be collected and how. Make sure you know your rights and the Complaints and Appeal process. Make sure you discuss any special needs or reasonable adjustments to be considered during the assessment (refer to the Reasonable Adjustments Strategy Matrix and negotiate these with your trainer/assessor). Make sure that you have access to a computer and the internet (if you prefer to type the answers). Make sure that you have all the required resources needed to complete this Assessment Task (AT). The due date of this assessment task is in accordance with your timetable. In exceptional (compelling and compassionate) circumstances, an extension to submit an assessment can be granted by the trainer/assessor. Evidence of the compelling and compassionate circumstances must be provided together with your request for an extension to submit your assessment work. The request for an extension to submit your assessment work must be made before the due date. Section 2: Reasonable adjustments I confirm that I have reviewed the Reasonable Adjustments guidelines and criteria as provided in Appendix A and attached relevant evidence as required and select the correct checkbox. I do require reasonable adjustment I do not require reasonable adjustment Declaration (Student to complete) I confirm that the purpose and procedures of this assessment task has been clearly explained to me. I confirm that I have been consulted about any special needs I might have in relation to the assessment process. I confirm that the criteria used for this assessment has been discussed with me, as have the consequences and possible outcomes of this assessment. I confirm I have accessed and understand the assessment information as provided in the Training Organisation’s Student Handbook. I confirm I have been given fair notice of the date, time, venue and/or other arrangements for this assessment. I confirm that I am ready for assessment. Student Name: Then Ji Lung Student Signature: Then Ji Lung Version Number: 10 (Review date: 01/06/2022) Unit Code: CPCCSF2004 Page 1 of 113 Student Pack Assessment method-based instructions and guidelines: Skills Test Assessment type  Skills Test - Place and fix reinforcement materials Instructions provided to the student: Assessment task description:  This is the second (2) assessment task you must successfully complete to be deemed competent in this unit of competency.  This assessment task is a Skills Test.  This assessment task consists of eight (8) practical demonstration activities.  Activity 1: Safe Work Procedures (SWPs) Sign-Off  Activity 2: Job Hazard Analysis (JHA)  Activity 3: Records of Tool-Box Talk (TBT)  Activity 4: Plan and prepare to place and fix reinforcement materials.  Activity 5: Prepare for reinforcement placement.  Activity 6: Place and fix reinforcement.  Activity 7: Check reinforcement prior to concrete pour.  Activity 8: Clean up after placing and fixing reinforcement materials.  You will receive your feedback within two (2) weeks, and you will be notified by your trainer/assessor when your results are available.  You must attempt all activities of the project for your trainer/assessor to assess your competence in this assessment task. Applicable conditions:  This skill test is untimed and is conducted as an open book assessment (this means you are able to refer to your textbook or other learner materials during the test).  You will be assessed independently on this assessment task.  No marks or grades are allocated for this assessment task. The outcome of the task will be Satisfactory or Not Satisfactory.  As you complete this assessment task, you are predominately demonstrating your skills, techniques and knowledge to your trainer/assessor.  Your trainer/assessor may ask you relevant questions during this assessment task Resubmissions and reattempts:  Where a student’s answers are deemed not satisfactory after the first attempt, a resubmission attempt will be allowed.  The student may speak to their trainer/assessor if they have any difficulty in completing this task and require reasonable adjustments.  For more information, please refer to the Training Organisation’s Student Handbook. Location:  This assessment task may be completed in: Version Number: 10 (Review date: 01/06/2022) Unit Code: CPCCSF2004 Page 2 of 113 Student Pack a classroom learning management system (i.e. Moodle), workplace, or an independent learning environment.  Your Trainer/Assessor will provide you with further information regarding the location for completing this assessment task. Purpose of the assessment The purpose of this assessment task is to assess the student’s knowledge and skills essential to place and fix reinforcement materials in a range of contexts and industry settings.  Skills to examine and clarify the task of placing and securing reinforcement materials.  Skills to examine task specifications to ensure they are in accordance with applicable laws, regulations, and codes of practise.  Skills to examine the task's work health and safety (WHS) requirements in accordance with safety plans and policies.  Skills to determine the need for safety signage and barricades.  Skills to examine the task's environmental requirements in light of environmental plans and legislative requirements.  Skills to choose plant, tools, and equipment, inspect them for serviceability, and repair or report any flaws.  Skills to check reinforcement material stock for correct type, quality, and quantity in relation to reinforcement schedule and details in plans/specifications.  Skills to gather materials for the task and store them safely until they are needed.  Skills to install clearly marked safety signage and barricades, as well as personal protective equipment (PPE).  Skills to in order to receive reinforcement, formwork should be checked for completion and conformity.  Skills to cut and bend reinforcement bars according to the layout, plans, and specifications.  Skills to tie bars to a predetermined configuration based on plans and specifications.  Skills to cut reinforcement sheets to the necessary sizes.  Skills to stiffening rods should be attached to panels as needed to facilitate handling processes.  Skills to place bar chairs and spacers in accordance with the requirements of the reinforcement schedule, plans, and specifications.  Skills to fabric reinforcement sheets should be installed in accordance with engineering drawings and specifications.  Skills to accordance with engineering drawings and specifications, locate and position reinforcement bars.  Skills to use bar chairs, ligatures, and spacers to locate and place reinforcement in accordance with engineering drawings and specifications.  Skills to in accordance with engineering drawings and specifications, support and secure reinforcement material into position.  Skills to cast-in items must be secured to reinforcement in accordance with engineering drawings and specifications.  Skills to in accordance with the plans and specifications, cover and protect the ends of protruding reinforcement material.  Skills to check the location and position of the reinforcement, as well as the fixing ties to the reinforcement, for accuracy.  Skills to check reinforcement material depth of coverage, clearance, spacing, and overlap in accordance with engineering drawings and job specifications. Version Number: 10 (Review date: 01/06/2022) Unit Code: CPCCSF2004 Page 3 of 113 Student Pack  Skills to clear the work area and dispose of, re-use, or recycle materials in accordance with applicable legislation, regulations, codes of practise, and task specifications.  Skills to plant, tools, and equipment must be cleaned, inspected, maintained, and stored in accordance with manufacturer specifications and workplace requirements. Task instructions  This is an individual assessment.  This assessment task requires the student to place and fix reinforcement for concrete work as part of construction processes.  The student is required to complete the following eight (8) activities in this assessment task: o Activity 1: Safe Work Procedures (SWPs) Sign-Off o Activity 2: Job Hazard Analysis (JHA) o Activity 3: Records of Tool-Box Talk (TBT) o Activity 4: Plan and prepare to place and fix reinforcement materials. o Activity 5: Prepare for reinforcement placement. o Activity 6: Place and fix reinforcement. o Activity 7: Check reinforcement prior to concrete pour. o Activity 8: Clean up after placing and fixing reinforcement materials.  The trainer/assessor (Supervisor) will induct you to the worksite.  You will be required to complete all parts of this assessment task.  The templates for each activity are provided along with this assessment task.  The student must comply with the written and verbal reporting requirements and procedures.  The student must wear appropriate PPE clothing when performing this task.  The student must follow the instructions of the trainer/assessor (Supervisor).  The trainer/assessor must assess the performance of the student as per the performance checklist provided and verbal questioning. Version Number: 10 (Review date: 01/06/2022) Unit Code: CPCCSF2004 Page 4 of 113 Student Pack Assessment Task 2 - Skills Test Skills Test This assessment task requires the student to place and fix reinforcement materials on a minimum of three (3) different jobs, each including:  Deformed bars  Rods  Mesh sheets. This includes:  Planning and preparing for the work  Final preparation for placement  Placing and fixing reinforcement  Checking the reinforcement  Completing clean-up activities. To do so, you will be required to complete the following activities:  Activity 1: Safe Work Procedures (SWPs) Sign-Off  Activity 2: Job Hazard Analysis (JHA)  Activity 3: Records of Tool-Box Talk (TBT)  Activity 4: Plan and prepare to place and fix reinforcement materials.  Activity 5: Prepare for reinforcement placement.  Activity 6: Place and fix reinforcement.  Activity 7: Check reinforcement prior to concrete pour.  Activity 8: Clean up after placing and fixing reinforcement materials. Version Number: 10 (Review date: 01/06/2022) Unit Code: CPCCSF2004 Page 5 of 113 Student Pack Instructions for trainer/assessor:  The trainer/assessor must assign a supervisor to each student or take on the role of Supervisor.  The trainer/assessor must arrange a worksite for the student to carry out the activities.  The workplace must be: o An actual workplace o A close simulation of the workplace environment provided that simulated or project-based assessment techniques replicate construction workplace conditions, materials, activities, responsibilities and procedures Note: The requirements for a simulated workplace environment are given below. The Supervisor or trainer/assessor must ensure that the simulated workplace environment requirements.  The role of the Supervisor (trainer/assessor) is to allocate the tasks, activities and responsibilities that you will be required to undertake to complete these assessments.  The worksite must meet the requirements given in the ‘Simulated workplace environment requirements’ section given below.  The trainer will supervise/observe the work by standing near the working location and evaluate your performance based on performance checklist benchmarks.  The trainer/assessor must use realistic tasks or simulated tasks, relevant specifications and work instructions, standard work practices, safety requirements and environmental constraints present on the worksite.  The trainer/assessor must ensure all work is performed to the standard required in the workplace and must meet the requirements of Australian Standards, work health and safety (WHS), Commonwealth and state or territory legislation, manufacturers’ specifications, and environmental plans and obligations.  The trainer/assessor must also verbally ask each student a series of questions during the student’s performance of each task. These questions are designed to assess the knowledge students are employing in the performance of the task.  The trainer/assessor must mark the student’s responses to verbal questions on the verbal questions record sheet included in the student’s assessment pack.  The trainer/assessor must provide a verbal briefing on each assessment prior to commencement. Instructions for the student:  The student will be required to bring all necessary PPEs required to complete this activity.  The student must follow the instructions provided by the Supervisor.  The student must complete the activities specified. Version Number: 10 (Review date: 01/06/2022) Unit Code: CPC


Información del documento

Subido en
18 de marzo de 2024
Número de páginas
113
Escrito en
2023/2024
Tipo
Examen
Contiene
Preguntas y respuestas
$13.99

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
GOLDENHEART
3.8
(53)
Vendido
501
Seguidores
376
Artículos
2665
Última venta
4 meses hace



Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes

Ups! No podemos cargar tu documento ahora. Inténtalo de nuevo o contacta con soporte.