Epa 608 Certification Study Set Exam

Epa 608 Certification Study Set Exam Are there drop-in replacements for R-12 systems? Why or why not? - CORRECT ANSWER-No because the new refrigerants are incompatible with the oils and lubricants used in R-12 systems. What type of oil is used in R-134a and what oils will it mix with? - CORRECT ANSWEREster based oils and they do not mix with other oils What type of lubricant is used with HCFCs? - CORRECT ANSWER-Alkylbenzene lubricant What is difference b/w ternary blend a azeotropic blend? - CORRECT ANSWERTernary blends are three-part mixtures whereas azeotropic blends are blends of two or more compounds that act like a single compound. What is the trait of a hygroscopic lubricant? - CORRECT ANSWER-It absorbs (takes on) moisture What is temperature glide and what type of blend won't have it? - CORRECT ANSWERTemp. blend is the difference between the dew point and the bubble point Dew Point - CORRECT ANSWER-Occurs when saturation temp in evaporator causes refrigerant to change from liquid to vapor Bubble Point - CORRECT ANSWER-Occurs when saturation temp in condenser changes refrigerant from vapor to liquid Will the gases in a ternary blend leak at the same rate? Why or why not? - CORRECT ANSWER-No because different refrigerants in blend have different vapor pressures, causing them to leak at uneven rates Refrigeration Process - CORRECT ANSWER-transfer of heat from one place to another Evaporator - CORRECT ANSWER-Absorbs heat into system from space to be cooled. Absorption of heat causes refrigerant to boil. Upon leaving, refrigerant changed to low pressure, low temperature vapor Compressor - CORRECT ANSWER-Takes low pressure, low temp vapor and changes it to a high-temp, high-pressure, superheated vapor and delivers it to the condenser Condenser - CORRECT ANSWER-Rejects heat from system and changes refrigerant from high-temp, high-pressure vapor into high-pressure, high-temp liquid