• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 1 fuera de 2 páginas
Examen

FCTC Study Guide Test prep Questions And Answers

Document preview thumbnail
Vista previa 1 fuera de 2 páginas

FCTC Study Guide Test prep Grooming Standard Essay - ANS Take 10 minutes to read and write about the grooming standards Gears - ANS A gear or cogwheel is a rotating machine part having cut teeth, or cogs, which mesh with another toothed part to transmit torque Gear Train - ANS Two or more gears working in a sequence meshed - ANS If the gears are touching adjacent - ANS near, next to, adjoining If the gears are touching then which way are the adjacent gears roatating? - ANS Move in opposite directions Rack - ANS a non-rotating toothed part, called a When two gears mesh, and one gear is bigger than the other (even though the size of the teeth must match), what occurs - ANS mechanical advantage is produced, with the rotational speeds and the torques of the two gears differing in an inverse relationship. Spur gears - ANS straight-cut gears parallel - ANS Side by side and having the same distance continuously between them:"parallel lines never meet" A belt and pulley system is characterized by - ANS two or more pulleys in common to a belt clockwise - ANS flowing the same direction a clock would flow Counter clockwise - ANS Flowing the opposite direction a clock would flow analogous - ANS comparable flanges - ANS an edge that sticks out used to strengthen an object by holding it in place or attaching it to another object rope and pulley system - ANS is characterized by the use of a single continuous rope to transmit a tension force around one or more pulleys to lift or move a load If the anchor knot is at the load - ANS then the mechanical advantage will be odd (1:1, 3:1, 5:1 etc.) If the anchor knot is at the anchor - ANS then the mechanical advantage will be even (2:1, 4:1, 6:1 etc.). Lever - ANS A lever is a machine consisting of a beam or rigid rod pivoted at a fixed hinge fulcrum - ANS The fixed point around which a lever pivots- Where the force cannot affect the object If A lever amplifies an input force it will what - ANS provide a greater output force input force - ANS the force exerted on a machine output force - ANS the force exerted by a machine


Información del documento

Subido en
18 de febrero de 2024
Número de páginas
2
Escrito en
2023/2024
Tipo
Examen
Contiene
Preguntas y respuestas
$9.39

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
DocLaura
4.2
(44)
Vendido
161
Seguidores
38
Artículos
6357
Última venta
2 meses hace



Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes

Ups! No podemos cargar tu documento ahora. Inténtalo de nuevo o contacta con soporte.