Lead Inspector Study Guide Questions with 100% Correct Solutions

Lead Was used in paint because it: - Ads Durability and serves as a drying agent Lead is sometimes found in drinking water because lead is in: - Pipe solder and Plumbing fixtures. What form of lead is often found in house paint? - White Lead How much lead must be present in a painted surface for it to be considered lead-based paint by HUD? - At least 1 milligram per square centimeter The federal agency responsible for protecting workers who work with lead in construction is? - OSHA What is OSHA's PEL for Lead? - 50 micrograms per cubic meter of air How much lead must be in paint for OSHA to consider it to be lead-based paint? - Any amount of lead Lead is often found in: - Vinyl blinds, ceramic coating and electrical cable coatings. Lead usually enters the body by: - Breathing in or eating. If lead gets in your body it may damage your: - Nervous system, reproductive system and kidneys. The CDC recommends community prevention activities when children blood lead levels are at least: - 10ug/ dl A medical procedure used to remove lead from blood is: - Chelation How do we determine if we exceed OSHA's PEL? - Personal Air monitoring. When we take paint chips samples, we: - Decontaminate any lead dust that may be created Final clearance testing for a lead abatement project is performed using: - Surface wiping sampling. The Lea dust clearance levels of the current EPA regulations are: - 40-floors 250-window sills 400- window troughs EPA certifications recognizes the following work discipline: - Inspector, Risk Assessor, Supervisor, Worker, Contractor