• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 3 fuera de 21 páginas
Examen

Electrical/Electronic Systems Exam Solved 100% Correct

Document preview thumbnail
Vista previa 3 fuera de 21 páginas

a 1. Check electrical circuits with a test light; determine needed repairs. - ANSWER-Test circuits with a volt meter or test light. If the component is getting the required voltage, but non-operative, there is a good chance that component is bad and should be replaced. a2. Check voltages and voltage drops in electrical/electronic circuits with a voltmeter; interpret readings and determine needed repairs. - ANSWER-A voltage drop test across a component gives a good representation of the condition of that component. Generally, an electrical component should use all of the supplied voltage. If it does not, it is usually safe to say there is a problem with said component. a3. Check current flow in electrical/electronic circuits and components with an ammeter; interpret readings and determine needed repairs. - ANSWER-Ammeters are connected in series with electrical circuits. Higher than normal currecnt flow would indicate high voltage or low resistance. Low current flow would indicate too high resistance or too low voltage. a4. Check continuity and resistances in electrical/electronic circuits and components with an ohmmeter; interpret readings and determine needed repairs. - ANSWER-When measuring continuity, make sure the circuit is not energized. The meter will supply its own power to perform this test, and meter damage can occur if the circuit is energized. Use the continuity test to find opens in circuits, where there should not be opens. No continuity would indicate an open. Continuity would indicate the circuit is closed. If it supposed to be closed, but there is no continuity, then you can assume there is a problem. On the other hand, if the circuit is supposed to be open, but there is continuity, there is a problem. Resistance specs are published on most everything these days. Use an ohmeter to measure resistance of the component in question, and compare to published specifications. If not within range, there is a problem. a5. Check electronic circuit waveforms using an oscilloscope; interpret readings and determine needed repairs. - ANSWER-An oscilloscope converts electrical signals to a visual representation of voltage signals over a period of time. An upward wave means a voltage increase. A downward wave means a voltage derease. A FLAT line indicates steady voltage. Compare your findings to what the changes in voltage should be to make a determination on whether or not the component is functioning properly. a6. Use scan-tool data to diagnose electronic systems; interpret readings and determine


Información del documento

Subido en
21 de octubre de 2023
Número de páginas
21
Escrito en
2023/2024
Tipo
Examen
Contiene
Preguntas y respuestas
$12.99

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
LUCKYSTAR2022
3.5
(163)
Vendido
931
Seguidores
726
Artículos
9664
Última venta
4 días hace




Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes

Ups! No podemos cargar tu documento ahora. Inténtalo de nuevo o contacta con soporte.