• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 1 fuera de 4 páginas
Ensayo

P5

Document preview thumbnail
Vista previa 1 fuera de 4 páginas

This document was written in 2017 and was marked to the standard of merit.

Vista previa del contenido

Open Loop Control
Open loop systems require things called open loop controllers which help the system
achieve a specific task, most of the time the open loop system will look at the input for it to
know what it needs to achieve. However, sometimes the output is not important for that
specific system. An example of a open loop control system is switching on a light bulb,
tumble drier, remote controls, washing machines etc…

An in depth example of an open loop control system would be a microwave or washing
machine, the machine is told a time to perform a certain task at a certain temperature/speed.
Say you set your microwave to two minutes, the microwave will heat your food for exactly
two minutes because you told it to. It doesn’t matter if the food is burnt, undercooked or
perfect, it will do what it’s told but it won’t be able to know if it’s actually cooking what you’re
putting in.

The advantages of open loop control systems are:
● Easy to maintain
● Easy construction
● Simple Design
● Low Cost

There are no real disadvantages to an Open loop system it just does not have some of the
features a closed loop has, such as, automatic readjustment.




Closed Loop Control
Closed loop systems have to monitor the input and output to make sure that specific tasks
are met, if these tasks are not met then often or not it will automatically correct itself. For
example, when a central heating senses that the temperature it’s trying to put out isn’t met it
will either turn up or down until the temperature is correct. This is done by the use of a
sensor which monitors the output and will adjust itself to reduce the amount of errors and
achieve the desired temperature (outcome). There are also many other devices that use
closed loop control systems, such as water level control, air conditioner, car cooling system
etc…

The advantages of closed loop control systems are:
● More accurate
● Automatically Adjusts
● Automatic
● Higher Bandwidth

The disadvantages of closed loop control systems are:
● More expensive than Open Loop
● Requires more maintenance
● Maintenance costs are often more
● Less stability

Información del documento

Nivel de Estudio
Tema
Subido en
30 de septiembre de 2017
Número de páginas
4
Escrito en
2017/2018
Tipo
Ensayo
Profesor(es)
Desconocido
Grado
Merit
$5.39

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
benjones
2.0
(4)
Vendido
21
Seguidores
17
Artículos
23
Última venta
5 año hace




Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes