Micro Final - Quiz 1 (Passed!)
Disk diffusion AST is performed on an 18-hour culture of E. coli. The MLS: -TSB is inoculated with organisms from 4 identical colonies -Turbidity of inoculated TSB is compared to a 0.5 McFarland standard -Mueller-Hinton plate is inoculated with the standardized suspension -Antimicrobial disks are placed on the agar surface 10 minutes later -Inoculated plate is incubated at 35*C in ambient air for 16 hours Evaluation of this procedure indicates that: a. Test was performed properly b. Wrong mcfarland standard was used c. Disks were applied too long after plate was inoculated d. Mueller hinton plate was not incubated long enough correct answers a. Test was performed properly When measuring the zone of inhibition of an SXT disk, the MLS observes a zone of inhibition, but there is also a light haze of growth up to the edge of the disk. What should the MLS do? a. Report the isolate as resistant to SXT b. Retest the organism using a denser inoculum c. Retest the isolate after diluting to a 0.05 mcfarland standard d. Ignore the haze if there is an 80% reduction in growth correct answers d. Ignore the haze if there is an 80% reduction in growth When performing a disk diffusion AST, the antibiotic disks are placed on the plate 30 minutes after inoculation with a standardized inoculum and incubated within 15 minutes of disk placement. This procedure could result in: a. The antibiotics not diffusing into the medium resulting in no zones b. Decreased zone diameters c. Increased zone diameters d. No effect on the final zone diameters correct answers b. Decreased zone diameters In disk diffusion AST, the size of the zone of inhibition used to indicate susceptibility to an antimicrobial is determined by a. Testing 30 strains of one genus of bacteria b. Correlating the zone size with the MIC c. Correlating the zone size with the minimum bactericidal concentration d. Correlating the zone size with the antibiotic content of the disk correct answers b. Correlating the zone size with the MIC The basis of cascade reporting (results suppression) is that group A antimicrobials are tested and reported first and group B antimicrobials are tested, but may only be reported if the a. Group A antimicrobials are recalled by the FDA b. Hospital pharmacy no longer stocks the Group A antimicrobials c. Isolate is resistant to all group A antibiotics d. Isolate is from a urine culture correct answers c. Isolate is resistant to all group A antibiotics
Información del documento
- Subido en
- 30 de septiembre de 2023
- Número de páginas
- 4
- Escrito en
- 2023/2024
- Tipo
- Examen
- Contiene
- Preguntas y respuestas