CBSPD Tech Chapter 8-Preparation & Packaging of Instruments & Devices Study Guide.

CBSPD Tech Chapter 8-Preparation &
Packaging of Instruments & Devices Study
Guide.

The air flow in the preparation and packaging area must be maintained
at:


A. Negative pressure
B. Positive pressure
C. Automatic pressure
D. Constant pressure - Exact Answer: B. Positive pressure


The preparation and packaging area MUST have an air exchange rate of:


A. 4 per hour
B. 6 per hour
C. 8 per hour
D. 10 per hour - Exact Answer: D. 10 per hour


What is the acceptable temperature range for the prep and packaging
area?


A. 60 deg F - 65 deg F (16 - 18 deg C)

, CBSPD Tech Chapter 8-Preparation &
Packaging of Instruments & Devices Study
Guide.

B. 62 deg F - 68 deg F (17 - 20 deg C)
C. 68 deg F - 73 deg F (20 - 23 deg C
D. 70 deg F - 75 F (21 - 24 deg C) - Exact Answer: C. 68 deg F - 73 deg F
(20- 23 deg C)


The IDEAL humidity level in the prep and pack area should be:


A. 50%
B. 40%
C. 20%
D. 35% - Exact Answer: A. 50%


If a non-perforated tray is used for the sterilization of instrument sets, it
MUST be:


A. Laid flat on the sterilizer rack
B. Wrapped with a towel prior to placing the instruments on it
C. Processed on the top rack of the sterilizer