• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 2 fuera de 12 páginas
Examen

AS level OCR Physics

Document preview thumbnail
Vista previa 2 fuera de 12 páginas

1. Prefix units 2. Uncertainties Adding or subtracting- Add the absolute uncertainties Multiplying or dividing- Add the percentage uncertainties Raising to a power- Multiply the percentage uncertainties by the power 3. Percentage un- certainty in the gradient uncertainty = ½(line of best fit - line of worst fit) Percentage uncertainty = uncertainty ÷ gradient of best fit line (× 100) 4. Speed Rate of change of distance 5. Displacement The distance an object has travelled in a given direction 6. Velocity Rate of change of displacement 7. Acceleration Rate of change of velocity 8. Scalars mass, time, temperature, speed, energy 9. Vectors displacement, force, velocity, acceleration 10. Velocity= u + at 11. Acceleration Change in velocity divided by time 12. Displacement= Average velocity × Time 13. Displacement= ut + ½at² 14. Velocity²= u² + 2as 15. 9.81 N / Kg Gravitational field strength 16. Displacement= ½gt² 17. Velocity= gt 18. Displacement= vt / 2 19. Velocity²= 2gs 20. Horizontal veloci- ty= V × Cos ¸ 21. Vertical velocity= V × Sin ¸ 22. Displacement Area under velocity-time graph 23. Time taken= Number of frames × (1 second / frame rate) 24. Stopping dis- tance= Thinking distance + Braking distance 25. Horizontal force= Force × Cos ¸ 26. Vertical force= Force × Sin ¸ 27. Inertia Resistance to a change in velocity 28. Pressure= h × Ád(ensity) × g 29. When the force isn't in the same direction as the movement W= F × x × Cos ¸ P= F × v × Cos ¸ 30. Power= Force × Velocity 31. K.E.= Work done 32. K.E.= Force × Displacement 33. K.E.= Mass × Acceleration × Displacement 34. Hooke's law Force is proportional to extension 35. K Force constant 36. K in series 1/K = 1/K1 + 1/K2 37. K in parallel K = K1 + K2 38. Tensile stress, Ã= Force / Area 39. Tensile strain, µ= Extension / Length 40. Work done= ½ × F × x 41. Force= K × x 42. Elastic potential energy= ½ × k × x² 43. Young modulus= Tensile stress / Tensile strain 44. Energy per unit volume= 45. Limit of propor- tionality ½ × Stress × Strain The graph is no longer a straight line The material stops obeying Hooke's law Returns to its original shape if stress were removed 46. Elastic limit The material behaves plastically No longer returns to its original state if stress were re- moved 47. Yield point Plastic deformation takes place with a constant or re- duced load The material stretches without any extra load 48. Conservation of momentum Momentum before = Momentum after 49. Elastic collision Momentum is conserved and kinetic energy is conserved 50. Inelastic collision Momentum is conserved but some kinetic energy is lost 51. Impulse (Ns) Change in momentum F × ”T 52. Newton's 1st law Force is needed to change velocity 53. Newton's 2nd law Force... Rate of change of momentum Change in momentum / Time 54. Newton's 3rd law Each force has an equal, opposite reaction force 55. Current Rate of flow of charge 56. One coulomb The amount of charge that passes in one second when the current is one ampere 57. Potential differ- ence Work done per unit charge 58. One volt The p.d. is one volt when you do one joule of work moving one coulomb of charge 1 V = 1 J / C 59. Current= Anev 60. One ohm If a p.d. of one volt makes a current of one amp flow through the component 61. Resistivity (Ohm metres) The resistance of a 1m length with a 1m² cross-sectional area 62. Resistivity= RA / L 63. Power= V × I 64. Work done= VI × T Power × Time 65. e.m.f, µ= V + v The total amount of work the battery does on each coulomb of charge 66. Resistance in se- ries Total R = R1+ R2 + R3 67. Resistance in par- allel 1/Total R = 1/R1 + 1/R2 + 1/R3 68. Potential divider (circuit with a volt- age source and V1 / V2 = R1 / R2 69. Intensity (W/m²) Power / Area 70. Intensity Intensity is the rate of flow of energy per unit area perpen- dicular to the direction of travel of the wave 71. Intensity is pro- portional to am- plitude squared Intensity Amplitude² 72. Polarised wave Oscillates in one direction 73. Refractive index= c / v 74. When a light n1 × sin ¸1 =n2 × sin ¸2 ray passes across Refractive index of first / second material- n1 and n2 a boundary be- tween two materi- als Angle of incidence / refraction- ¸1and ¸2 75. Sin C= 1 / n 76. Coherent Same wavelength and frequency with a fixed phase dif- ference Two coherent sources needed to get interference pat- terns 77. Constructive in- terference Path difference is a whole number of wavelengths Path difference = n» 78. Destructive inter- ference Path difference is an odd number of half wavelengths Path difference = (n + ½)» 79. Fringe spacing, x= »D / A 80. Stationary wave The superposition of two progressive waves with the same wavelength, moving in opposite directions 81. First harmonic Second harmonic Third harmonic One antinode- half a wavelength Two antinodes- one wavelength Three antinodes- one and a half wavelengths 82. Photon A quantum of EM radiation 83. E= hf = hc / » 84. Electronvolt The kinetic energy gained by an electron when it is accel- erated through a potential difference of one volt 1 eV = 1.6 × 10^-19 J 85. Photoelectric ef- fect 1) No photoelectrons are emitted if the radiation has a frequency below a certain value (threshold frequency) 2) The photoelectrons are emitted with a variety of kinetic energies ranging from zero to some maximum value. The value of maximum kinetic energy increases with frequen- cy and is unaffected by intensity 3) The number of photoelectrons emitted per second is proportional to intensity 86. Work function en- ergy, ¦ Energy needed to break metallic bonds 87. Planck constant, h 6.63 × 10^-34 Js 88. Threshold fre- quency, f= ¦ /h 89. For electrons to be released hf e¦ 90. Maximum kinetic energy hf= ¦ +max K.E. 91. de Broglie equa- tion »= h / p (momentum) 92. »for electrons ac- celerated in a vac- uum tube Same size as electromagnetic waves in the X-ray part of the spectrum 93. Archimedes' prin- ciple Upthrust = weight of fluid displaced

Vista previa del contenido

AS level OCR Physics
Study online at
https://quizlet.com/_2ebhcb

1. Prefix units




2. Uncertainties Adding or subtracting- Add the absolute
uncertainties
Multiplying or dividing- Add the percentage
uncertainties Raising to a power- Multiply the
percentage uncertainties by the power

3. Percentage uncertainty = ½(line of best fit - line of worst fit)
un- certainty in Percentage uncertainty = uncertainty ÷ gradient
the gradient of best fit line (× 100)

4. Speed Rate of change of distance

5. Displacement The distance an object has travelled in a given
direction

6. Velocity Rate of change of displacement

7. Acceleration Rate of change of velocity

8. Scalars mass, time, temperature, speed, energy

9. Vectors displacement, force, velocity, acceleration

10. Velocity= u + at

11. Acceleration Change in velocity divided by time

12. Displacement= Average velocity × Time

13. Displacement= ut + ½at²

14. Velocity²= u² + 2as
1

, AS level OCR Physics
Study online at
https://quizlet.com/_2ebhcb
15. 9.81 N / Kg




2

Información del documento

Estudio
Subido en
2 de mayo de 2023
Número de páginas
12
Escrito en
2022/2023
Tipo
Examen
Contiene
Preguntas y respuestas
$10.99

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
Vendido
101
Seguidores
44
Artículos
5717
Última venta
1 mes hace



Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes