CYB-210 Module 7 Project Two
CYB-210 Module 7 Project Two. This project was a little more tricker than the other one. With this project we were given 3 networks. Networks A and B needed to be connected into one with a new network scheme. Network 3 and the new network needed to be connected together. With this being said I added a third switch to account for future expansion. I kept the two switches we were given for subnet 1 and 2 and added a third to connect the networks to that switch and then into the router. Doing this if the company makes more room in their building for the other company the network will be able to handle more users or endpoints. With these switches I switched a few ports into trunk mode so this can be done. I did not want to keep adding more cables out of the router and make it messy. Second, I connected the two networks together using a serial cable. This is not something I would do as depending on what you have going across the network it may slow it down.
Información del documento
- Subido en
- 21 de abril de 2023
- Número de páginas
- 17
- Escrito en
- 2022/2023
- Tipo
- Examen
- Contiene
- Preguntas y respuestas
