• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 1 fuera de 1 páginas
Ensayo

P6- Design a control system

Document preview thumbnail
Vista previa 1 fuera de 1 páginas

For P6 and P7, learners must design and implement a control system. This should be a full working model that demonstrates what the learner has and has not understood from the unit. Logbooks, photos and plans can all be useful evidence, supplemented by test records and witness statements or observation records. The design should include all the elements outlined in the unit content. Testing should include performance testing,ie does it meet its objective efficiently and effectively

Vista previa del contenido

The yellow boxes show an
action, this one is about the
robot moving at a constant
speed because this would
P6- Design
be the most logical step.

This is the start of the MO
Way Robots program.


This is the first sensor I
implemented into the robot
which was a detection sensor
for the left sensor, the sensor
The direction the arrow is
underneath was for the right
pointing is important as it
sensor.
shows which way the program
needs to go for in this case it
was right. If the arrow was
connected the other way round
the program will not function
properly.




This is another detection This tick box shows if the sensor if
sensor which is purple. This is the is detected then this direction
This is a simple action which variable so in this case the is the way the program will
tells the robot to do robot will monitor the follow. However if the cross going
something, normally it is in brightness if it is less than downwards shows the opposite,
yellow. 50%. so if nothing is detected it will
follow the program downwards.



This is the design of the robot program which was made in Microsoft Visio. All of the boxes were
added in and then joined with a connector tool. This start of the robot is from the robot and goes in
order all the way to the bottom. With the design being made I could then recreate this easily in the
MO Way robot program as it looked visually similar so anyone could create this program again if
they wanted to.

Información del documento

Nivel de Estudio
Tema
Subido en
18 de agosto de 2016
Número de páginas
1
Escrito en
2015/2016
Tipo
Ensayo
Profesor(es)
Desconocido
Grado
Pass
$4.71
Comprado por 2 estudiantes

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
topqualityworka
3.7
(425)
Vendido
2320
Seguidores
1115
Artículos
210
Última venta
2 año hace

Reseñas de compradores verificados




Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes