• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 1 fuera de 3 páginas
Otro

Api 1104 Terms Verified Study Guide

Document preview thumbnail
Vista previa 1 fuera de 3 páginas

Api 1104 Terms Verified Study Guide

Vista previa del contenido

API 1104 TERMS VERIFIED STUDY GUIDE


Butt weld - Answers - A nonstandard term for a weld in a butt joint, which is a joint
between two members aligned approximately in the same place.

Classification number - Answers - A number in an AWS numbering system that
identifies electrodes and filler metals according to their chemistry and operating
characteristics.
SMAW--7018, GMAW--ER70S-6, GTAW--EWTH-2

defect - Answers - A rejectable imperfection that impairs the suitability of a structure
for its intended purpose. API 1104 Section 9 for a list of types of imperfections.

destructive testing - Answers - Testing that renders the material or part useless for
service, performed to obtain information on material properties and soundness.

discontinuity - Answers - An irregularity in an otherwise uniform structure. See API
1104 Section 9 for a list of types of imperfections and the criteria that may allow
them in a weldment. API 1104 does not use the word discontinuity but rather calls
them indications or imperfections. Not all discontinuities, imperfections or indications
are rejectable.

essential variable - Answers - A component of a welding procedure specification that
requires requalification if changed beyond certain limits specified in the applicable
code

face reinforcement - Answers - A weld metal build-up, raised above the surface of
the parent metal in excess of of what is required to fill a groove joint on the side of
the base metal from which welding was done.

faying surface - Answers - The mating surface of two parts that are to be welded
together.

filler metal - Answers - The metal or alloy to be added in making a brazed, soldered
or welded joint.

fillet weld - Answers - A weld of approximately triangular cross section joining two
surfaces approximately at right angles.

fisheye - Answers - A discontinuity attributed to the presence of hydrogen in the
weld, observed on the fracture surface of a weld in steel that consists of a small pore
or inclusion surrounded by a round bright area.

flux - Answers - A substance that hinders or prevents oxide formation, and promotes
the union of the metals being joined.

Información del documento

Subido en
17 de noviembre de 2026
Número de páginas
3
Escrito en
2026/2027
Tipo
Otro
Personaje
Desconocido
$11.99

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
GEEKA
3.8
(379)
Vendido
2239
Seguidores
1451
Artículos
63782
Última venta
16 horas hace



Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes