QUESTIONS AND CORRECT ANSWERS (VERIFIED
ANSWERS) Q&A 2027 |INSTANT DOWNLOAD PDF
1. What is the primary purpose of structural engineering?
A. To improve building appearance B. To ensure structures
safely resist applied loads C. To reduce construction labor D. To
select interior finishes
Correct Answer: B. To ensure structures safely resist applied
loads.
Rationale: Structural engineering focuses on designing
structures that safely resist loads while maintaining stability,
strength, and serviceability.
2. Which of the following is considered a dead load?
A. Occupants B. Furniture C. Self-weight of a structural beam D.
Moving vehicles
Correct Answer: C. Self-weight of a structural beam.
Rationale: Dead loads are permanent loads resulting from the
weight of structural and permanently attached components.
3. What is a live load?
A. Permanent structural weight B. Temporary or movable
imposed load C. Weight of foundations D. Weight of concrete
walls only
,Correct Answer: B. Temporary or movable imposed load.
Rationale: Live loads include occupants, furniture, movable
equipment, and other temporary loads.
4. Which material is commonly used for structural
reinforcement in concrete?
A. Aluminum B. Reinforcing steel C. Plastic D. Glass
Correct Answer: B. Reinforcing steel.
Rationale: Reinforcing steel provides tensile resistance because
concrete is relatively weak in tension.
5. What is the SI unit of force?
A. Pascal B. Joule C. Newton D. Watt
Correct Answer: C. Newton.
Rationale: The newton (N) is the SI unit of force and is
equivalent to one kilogram-meter per second squared.
6. What does structural equilibrium require?
A. Forces must always increase B. The sum of forces and
moments must equal zero C. All members must have identical
dimensions D. The structure must contain no joints
Correct Answer: B. The sum of forces and moments must equal
zero.
Rationale: A structure in static equilibrium has zero resultant
force and zero resultant moment.
,7. Which type of stress is produced when a member is pulled
apart?
A. Compressive stress B. Tensile stress C. Shear stress D.
Bearing stress
Correct Answer: B. Tensile stress.
Rationale: Tensile stress develops when external forces attempt
to stretch or elongate a structural member.
8. Which type of stress occurs when a member is squeezed?
A. Tensile stress B. Shear stress C. Compressive stress D.
Thermal stress
Correct Answer: C. Compressive stress.
Rationale: Compressive stress develops when forces act toward
one another and shorten a structural member.
9. What is the primary function of a structural foundation?
A. To support interior finishes B. To transfer structural loads
safely into the ground C. To prevent all building movement D.
To increase roof ventilation
Correct Answer: B. To transfer structural loads safely into the
ground.
Rationale: Foundations distribute building loads to supporting
soil or rock without exceeding acceptable bearing and
settlement limits.
10. Which structural member primarily resists bending?
, A. Beam B. Anchor bolt C. Foundation drain D. Expansion joint
Correct Answer: A. Beam.
Rationale: Beams are structural members designed primarily to
resist transverse loads through bending and shear.
11. What is the purpose of a column?
A. To resist only horizontal loads B. To transfer primarily axial
compression loads C. To provide waterproofing D. To reduce
roof insulation
Correct Answer: B. To transfer primarily axial compression
loads.
Rationale: Columns generally transfer vertical loads from
beams and floors to lower structural elements and foundations.
12. What is the modulus of elasticity?
A. The ratio of stress to strain within the elastic range B. The
maximum weight of a building C. The total length of a structural
member D. The amount of reinforcement in concrete
Correct Answer: A. The ratio of stress to strain within the elastic
range.
Rationale: Modulus of elasticity measures material stiffness and
is calculated as stress divided by strain in the linear elastic
range.
13. Which structural system commonly uses diagonal
members to resist lateral forces?