PATHFINDER WRITTEN SLING LOAD FULL
SOLUTION STUDY GUIDE
◉ TM 4-48.10.
Answer: Multiservice Helicopter Sling Loads: Single Point Rigging
Procedures
◉ TM 4-48.11.
Answer: Multiservice Helicopter Sling Loads: Dual Point Rigging
Procedures
◉ FM 3-21.38.
Answer: Pathfinder Operations
◉ FM 4-20.102.
Answer: Airdrop of Supplies and Equipment: Rigging Airdrop
Platforms
◉ 3 essential elements involved in sling load operations.
Answer: Supported Unit
Supporting Unit (aviation unit)
Receiving Unit
,◉ What is the purpose of the Supported Unit?.
Answer: -Advance coordination with the supporting unit
-Actual rigging of the loads
-Furnishing all equipment
-Ensuring all loads are properly rigged and do not exceed the
Allowable Cargo Load (ACL)
◉ What is the purpose of the Supporting Unit?.
Answer: -Ensure that loads fall within the transporting aircraft's ACL
-Provides assistance in the recovery and return of sling-load
equipment
-Establish coordination with the supported and receiving units
◉ What is the purpose of the Receiving Unit?.
Answer: -Selecting, preparing and controlling the LZ
-Receiving and de-rigging the load
Provide the return of lifting equipment and or personnel.
◉ What are the three types of loads?.
Answer: High Density
Low Density
, Aerodynamic
◉ High Density.
Answer: -Offers the best stability
◉ Low Density.
Answer: -Offers the least stability
◉ Aerodynamic.
Answer: -This load is unstable until the load is streamlined
◉ What is the Allowable Cargo Load (ACL)?.
Answer: -The maximum load capacity for a particular mission and
determines what the helicopter can lift.
◉ What is the ACL based on?.
Answer: -Type of aircraft
-Age of the airframe
-Pilot experience
-Altitude above sea level
-Temperature
-Humidity
SOLUTION STUDY GUIDE
◉ TM 4-48.10.
Answer: Multiservice Helicopter Sling Loads: Single Point Rigging
Procedures
◉ TM 4-48.11.
Answer: Multiservice Helicopter Sling Loads: Dual Point Rigging
Procedures
◉ FM 3-21.38.
Answer: Pathfinder Operations
◉ FM 4-20.102.
Answer: Airdrop of Supplies and Equipment: Rigging Airdrop
Platforms
◉ 3 essential elements involved in sling load operations.
Answer: Supported Unit
Supporting Unit (aviation unit)
Receiving Unit
,◉ What is the purpose of the Supported Unit?.
Answer: -Advance coordination with the supporting unit
-Actual rigging of the loads
-Furnishing all equipment
-Ensuring all loads are properly rigged and do not exceed the
Allowable Cargo Load (ACL)
◉ What is the purpose of the Supporting Unit?.
Answer: -Ensure that loads fall within the transporting aircraft's ACL
-Provides assistance in the recovery and return of sling-load
equipment
-Establish coordination with the supported and receiving units
◉ What is the purpose of the Receiving Unit?.
Answer: -Selecting, preparing and controlling the LZ
-Receiving and de-rigging the load
Provide the return of lifting equipment and or personnel.
◉ What are the three types of loads?.
Answer: High Density
Low Density
, Aerodynamic
◉ High Density.
Answer: -Offers the best stability
◉ Low Density.
Answer: -Offers the least stability
◉ Aerodynamic.
Answer: -This load is unstable until the load is streamlined
◉ What is the Allowable Cargo Load (ACL)?.
Answer: -The maximum load capacity for a particular mission and
determines what the helicopter can lift.
◉ What is the ACL based on?.
Answer: -Type of aircraft
-Age of the airframe
-Pilot experience
-Altitude above sea level
-Temperature
-Humidity