CM 2501 – Hebert Practice Questions with
Verified Correct Answers
positive
A simple beam with only gravity loads acting between the supports would have a ______
bending moment. (positive or negative)
compression, tension
A simple beam with only gravity loads acting between the supports would be in _____ on the top
surface and in _____ on the bottom surface.
negative
A cantilever with only gravity loads acting on it would have a ______ bending moment. (positive
or negative)
tension, compression
A cantilever with only gravity loads acting on it would be in ______ on the top surface and
_____ on the bottom surface. (tension or compression)
centroid
The center of mass or area
rebar
Reinforced concrete is able to resist tensile forces due to the use of _____.
stronger
Verified Correct Answers
positive
A simple beam with only gravity loads acting between the supports would have a ______
bending moment. (positive or negative)
compression, tension
A simple beam with only gravity loads acting between the supports would be in _____ on the top
surface and in _____ on the bottom surface.
negative
A cantilever with only gravity loads acting on it would have a ______ bending moment. (positive
or negative)
tension, compression
A cantilever with only gravity loads acting on it would be in ______ on the top surface and
_____ on the bottom surface. (tension or compression)
centroid
The center of mass or area
rebar
Reinforced concrete is able to resist tensile forces due to the use of _____.
stronger
