Arulmigu Meenakshi Amman College of Engineering
Vadamavandal-604410.
ME3581 - METROLOGY AND DYNAMICS
LABORATORY
Prepared by
V.Umapathy,
Prof. /Mech.
, Arulmigu Meenakshi Amman College of Engineering
Vadamavandal-604410.
Record Note Book
1 Name
2 Register No.
3 Year and Semester III & V
4 Branch and Section Mechanical & A-Section
5 Course code and Title ME3581 - METROLOGY AND
DYNAMICS LABORATORY
6 Academic year 2025-2026
7 Date of Examination
Signature of the Staff Signature of the HOD
Internal Examiner External Examiner
, ME3581 - METROLOGY AND DYNAMICS LABORATORY
Content
Ex.No Name Date Page No. Signature
1. Calibration and use of Vernier caliper
2. Calibration and use of micrometer
3. Calibration and use of Vernier height gauge
4. Calibration and use of depth micrometer
5. Calibration and use of bore gauge
6. Calibration and use of telescopic gauge
7. Calibration and use of Comparators
8. Measurement of angles using bevel
protractor
9. Measurement of angles using sine bar
10. Measurement of angles using autocollimator,
11. Measurement of angles using precision level
12. Measurement of assembly and transmission
elements screw thread parameters using
Screw thread Micrometers
13. Measurement of assembly and transmission
elements Three wire method.
14. Measurement of assembly and transmission
elements Toolmaker’s microscope.
15. Measurement of gear parameters using
Micrometers, Vernier caliper, Gear tester
16. Measurement of thread parameters using tool
maker microscope
17. Measurement of temperature using thermo
, couple
18. Measurement of force using load cell
19. Measurement of Torque using digital torque
indicator
20. Measurement of Roughness using digital
Roughness meter
21. Measurement of features in a prismatic
component using Coordinate Measuring
Machine (CMM), Programming of CNC
Coordinate Measuring Machines for repeated
measurements of identical components.
22. Non-contact (Optical) measurement using
Profile projector and Video measurement
system
23. Measurement of form parameters
Straightness, Flatness, Roundness,
Cylindricity, Perpendicularity, Runout,
Concentricity in the given component using
Roundness tester.
24. Measurement of Surface finish in
components manufactured using various
processes (turning, milling, grinding, etc.,)
using stylus based instruments.
25. Study of gear parameters
26. Epicycle gear Train
27. Determination of moment of inertia of
flywheel and axle system.
28. Determination of mass moment of inertia of
a body about its axis of symmetry
29. Undamped free vibrations of a single degree
freedom spring-mass system.
30. Torsional Vibration (Undamped) of single
rotor shaft system.
31. Dynamic analysis of cam mechanism
32. Experiment on Watts Governor
Vadamavandal-604410.
ME3581 - METROLOGY AND DYNAMICS
LABORATORY
Prepared by
V.Umapathy,
Prof. /Mech.
, Arulmigu Meenakshi Amman College of Engineering
Vadamavandal-604410.
Record Note Book
1 Name
2 Register No.
3 Year and Semester III & V
4 Branch and Section Mechanical & A-Section
5 Course code and Title ME3581 - METROLOGY AND
DYNAMICS LABORATORY
6 Academic year 2025-2026
7 Date of Examination
Signature of the Staff Signature of the HOD
Internal Examiner External Examiner
, ME3581 - METROLOGY AND DYNAMICS LABORATORY
Content
Ex.No Name Date Page No. Signature
1. Calibration and use of Vernier caliper
2. Calibration and use of micrometer
3. Calibration and use of Vernier height gauge
4. Calibration and use of depth micrometer
5. Calibration and use of bore gauge
6. Calibration and use of telescopic gauge
7. Calibration and use of Comparators
8. Measurement of angles using bevel
protractor
9. Measurement of angles using sine bar
10. Measurement of angles using autocollimator,
11. Measurement of angles using precision level
12. Measurement of assembly and transmission
elements screw thread parameters using
Screw thread Micrometers
13. Measurement of assembly and transmission
elements Three wire method.
14. Measurement of assembly and transmission
elements Toolmaker’s microscope.
15. Measurement of gear parameters using
Micrometers, Vernier caliper, Gear tester
16. Measurement of thread parameters using tool
maker microscope
17. Measurement of temperature using thermo
, couple
18. Measurement of force using load cell
19. Measurement of Torque using digital torque
indicator
20. Measurement of Roughness using digital
Roughness meter
21. Measurement of features in a prismatic
component using Coordinate Measuring
Machine (CMM), Programming of CNC
Coordinate Measuring Machines for repeated
measurements of identical components.
22. Non-contact (Optical) measurement using
Profile projector and Video measurement
system
23. Measurement of form parameters
Straightness, Flatness, Roundness,
Cylindricity, Perpendicularity, Runout,
Concentricity in the given component using
Roundness tester.
24. Measurement of Surface finish in
components manufactured using various
processes (turning, milling, grinding, etc.,)
using stylus based instruments.
25. Study of gear parameters
26. Epicycle gear Train
27. Determination of moment of inertia of
flywheel and axle system.
28. Determination of mass moment of inertia of
a body about its axis of symmetry
29. Undamped free vibrations of a single degree
freedom spring-mass system.
30. Torsional Vibration (Undamped) of single
rotor shaft system.
31. Dynamic analysis of cam mechanism
32. Experiment on Watts Governor
