MSSC SAFETY EXPECTED QUESTIONS WITH
VERIFIED ANSWERS
Question 1.
Safety guidelines do not permit ___________ to be removed by unauthorized personnel.
ANSWER
Asbestos
Question 2.
A CO2 fire extinguisher is used for which type of fire?
ANSWER
Electrical
Question 3.
The _________ identifies chemicals and sets limits for their use.
ANSWER
SDS
Question 4.
When a small fire is noticed near a cabinet of flammable materials you should first _________.
ANSWER
Sound the alarm
Question 5.
Employers should provide training in the use of personal protective equipment
ANSWER
To reduce the employee's risk of hazardous material exposure
,Question 6.
Threshold Limit Value (TLV) is described as
ANSWER
The amount of exposure to a chemical without the unreasonable risk of injury
Question 7.
To avoid potential fires, combustible materials must be kept a minimum of ______ feet from any
potential ignition sources.
ANSWER
35
Question 8.
The first step in handling hazardous chemicals is ___________.
ANSWER
To know the hazards about the chemical you are handing
Question 9.
The HMIS is a labeling system developed by the NPCA and is represented by ________.
ANSWER
Four colored bars; blue, red, orange, and white
Question 10.
Which agency is responsible for ensuring the workplace is free from environmental hazards?
ANSWER
OSHA
Question 11.
The _______ labeling system was designed to help firefighters in the event of an emergency.
ANSWER
NFPA
,Question 12.
Environmental test results must be _________
ANSWER
Made available to employees or test subjects
Question 13.
The primary place to look for information regarding shipment of specific hazardous materials is
the _________. (This is not in the reading)
ANSWER
Hazardous Materials Table
Question 14.
You are going to remove some paint from a panel and are using paint stripper. If you cannot find
safe handling information on the bottle, what should you do?
ANSWER
Check the SDS
Question 15.
A labeling system designed to quickly and accurately identify hazardous materials is what?
ANSWER
Hazardous Material Identification System
Question 16.
You should not unload a truck if ____________
ANSWER
You do not understand the placard on the truck
, Question 17.
Which of the following actions would best reduce fire hazards?
ANSWER
Disposing of of rags promptly
Question 18.
Coming back from lunch you noticed a co-worker accidentally spilled a barrel and its contents
have spilled into the sanitary sewer. What should you do?
ANSWER
Notify your supervisor or team leader immediately so the appropriate authorities can be
contacted.
Question 19.
The first step in safely handling hazardous chemicals is _________.
ANSWER
To know the hazards about the chemical you are handling
Question 20.
In an area that consistently contains dust, or other combustibles you should ________
ANSWER
Remove all sources of ignition
Question 21.
The emergency response team should be notified immediately if you observe a(n) ______
ANSWER
Hazardous material spill
VERIFIED ANSWERS
Question 1.
Safety guidelines do not permit ___________ to be removed by unauthorized personnel.
ANSWER
Asbestos
Question 2.
A CO2 fire extinguisher is used for which type of fire?
ANSWER
Electrical
Question 3.
The _________ identifies chemicals and sets limits for their use.
ANSWER
SDS
Question 4.
When a small fire is noticed near a cabinet of flammable materials you should first _________.
ANSWER
Sound the alarm
Question 5.
Employers should provide training in the use of personal protective equipment
ANSWER
To reduce the employee's risk of hazardous material exposure
,Question 6.
Threshold Limit Value (TLV) is described as
ANSWER
The amount of exposure to a chemical without the unreasonable risk of injury
Question 7.
To avoid potential fires, combustible materials must be kept a minimum of ______ feet from any
potential ignition sources.
ANSWER
35
Question 8.
The first step in handling hazardous chemicals is ___________.
ANSWER
To know the hazards about the chemical you are handing
Question 9.
The HMIS is a labeling system developed by the NPCA and is represented by ________.
ANSWER
Four colored bars; blue, red, orange, and white
Question 10.
Which agency is responsible for ensuring the workplace is free from environmental hazards?
ANSWER
OSHA
Question 11.
The _______ labeling system was designed to help firefighters in the event of an emergency.
ANSWER
NFPA
,Question 12.
Environmental test results must be _________
ANSWER
Made available to employees or test subjects
Question 13.
The primary place to look for information regarding shipment of specific hazardous materials is
the _________. (This is not in the reading)
ANSWER
Hazardous Materials Table
Question 14.
You are going to remove some paint from a panel and are using paint stripper. If you cannot find
safe handling information on the bottle, what should you do?
ANSWER
Check the SDS
Question 15.
A labeling system designed to quickly and accurately identify hazardous materials is what?
ANSWER
Hazardous Material Identification System
Question 16.
You should not unload a truck if ____________
ANSWER
You do not understand the placard on the truck
, Question 17.
Which of the following actions would best reduce fire hazards?
ANSWER
Disposing of of rags promptly
Question 18.
Coming back from lunch you noticed a co-worker accidentally spilled a barrel and its contents
have spilled into the sanitary sewer. What should you do?
ANSWER
Notify your supervisor or team leader immediately so the appropriate authorities can be
contacted.
Question 19.
The first step in safely handling hazardous chemicals is _________.
ANSWER
To know the hazards about the chemical you are handling
Question 20.
In an area that consistently contains dust, or other combustibles you should ________
ANSWER
Remove all sources of ignition
Question 21.
The emergency response team should be notified immediately if you observe a(n) ______
ANSWER
Hazardous material spill
