NACE CIP Level 1 GUARANTEED PASS !!
SSPC-SP15 - (ANSWER)Commercial grade power tool cleaning
SSPC-SP16 - (ANSWER)Brush-off blast cleaning of Non Ferrous Metals
SSPC-SP 14 - (ANSWER)Industrial Blast Cleaning
10% Stain
SSPC-SP13 - (ANSWER)Surface prep of concrete
SSPC-SP7 - (ANSWER)Brush off blast cleaning
NACE SP0178 - (ANSWER)Design, fabrication, and surface finish practices for tanks and
vessels to be lined for immersion service.
SSPC-SP 11 - (ANSWER)Power Tool Cleaning to Bare Metal
SSPC-PA2 - (ANSWER)Measurement of Dry Coat Thickness with magnetic gauges.
SSPC-SP10/NACE 2 limits staining to ______per each unit area - (ANSWER)5%
Near White Commercial Blast
SSPC-SP6/NACE 3 limits staining to _______per each unit area - (ANSWER)33%
Commercial Blasts
NACE SP0188 - (ANSWER)holiday testing
Page 1 of 21
,SSPC-SP1 - (ANSWER)Solvent Cleaning
SSPC-SP5/NACE 1 limits staining to _________per each unit area - (ANSWER)0%
White Metal Blast
SSPC-SP3 - (ANSWER)Power Tool Cleaning
SSPC-SP2 - (ANSWER)Hand Tool Cleaning
ASTM D 4417 - (ANSWER)surface profile blast cleaned steel
SA-3 - (ANSWER)Blast Cleaning to Visually Clean Steel
SA 2 1/2 - (ANSWER)Very Thorough Blast Cleaning
Sa 2 - (ANSWER)Thorough Blast Cleaning
SA 1 - (ANSWER)Light Blast Cleaning
St 3 - (ANSWER)Very Thorough Hand and Power Tool Cleaning
St 2 - (ANSWER)Thorough Hand and Power Tool Cleaning
2 Non-convertible coating types - (ANSWER)1. Evaporation cure 2. Coalescence cure
SSPC-VIS1 Defines surface covered with and rust as what grade? - (ANSWER)Grade B
Page 2 of 21
, SSPC-SP2
ISO St 3
ISO St 2
All deal with hand tool Cleaning. True or false? - (ANSWER)True
Acrylic - (ANSWER)A plastic resin that, when mixed with water and pigment, forms an
inorganic and quick-drying paint medium.
-Excellent UV and weather resistance
Polyaspartic - (ANSWER)-Used to achieve low or near zero VOC systems
-pot lives from 5 minutes to several hours
-Film builds up to (15 mils) DFT in a single pass
Phenolic - (ANSWER)Typically used where low PH environments and Higher Temperature are
factors
latex (Emulsions) - (ANSWER)-Resins normally thermoplastic resin types
-Coalescence curing
(Non-convertible)
Furans - (ANSWER)-Applied by Brick layers not coating applicators.
-Not a common coating type
epoxy - (ANSWER)-Two parts, resin and hardener must be mixed.
-Can be solvent-based, water-based, or solvent-free
Alkyds - (ANSWER)-Oxidative curing
-Reffered to as "Oil Based Paints"
Page 3 of 21
SSPC-SP15 - (ANSWER)Commercial grade power tool cleaning
SSPC-SP16 - (ANSWER)Brush-off blast cleaning of Non Ferrous Metals
SSPC-SP 14 - (ANSWER)Industrial Blast Cleaning
10% Stain
SSPC-SP13 - (ANSWER)Surface prep of concrete
SSPC-SP7 - (ANSWER)Brush off blast cleaning
NACE SP0178 - (ANSWER)Design, fabrication, and surface finish practices for tanks and
vessels to be lined for immersion service.
SSPC-SP 11 - (ANSWER)Power Tool Cleaning to Bare Metal
SSPC-PA2 - (ANSWER)Measurement of Dry Coat Thickness with magnetic gauges.
SSPC-SP10/NACE 2 limits staining to ______per each unit area - (ANSWER)5%
Near White Commercial Blast
SSPC-SP6/NACE 3 limits staining to _______per each unit area - (ANSWER)33%
Commercial Blasts
NACE SP0188 - (ANSWER)holiday testing
Page 1 of 21
,SSPC-SP1 - (ANSWER)Solvent Cleaning
SSPC-SP5/NACE 1 limits staining to _________per each unit area - (ANSWER)0%
White Metal Blast
SSPC-SP3 - (ANSWER)Power Tool Cleaning
SSPC-SP2 - (ANSWER)Hand Tool Cleaning
ASTM D 4417 - (ANSWER)surface profile blast cleaned steel
SA-3 - (ANSWER)Blast Cleaning to Visually Clean Steel
SA 2 1/2 - (ANSWER)Very Thorough Blast Cleaning
Sa 2 - (ANSWER)Thorough Blast Cleaning
SA 1 - (ANSWER)Light Blast Cleaning
St 3 - (ANSWER)Very Thorough Hand and Power Tool Cleaning
St 2 - (ANSWER)Thorough Hand and Power Tool Cleaning
2 Non-convertible coating types - (ANSWER)1. Evaporation cure 2. Coalescence cure
SSPC-VIS1 Defines surface covered with and rust as what grade? - (ANSWER)Grade B
Page 2 of 21
, SSPC-SP2
ISO St 3
ISO St 2
All deal with hand tool Cleaning. True or false? - (ANSWER)True
Acrylic - (ANSWER)A plastic resin that, when mixed with water and pigment, forms an
inorganic and quick-drying paint medium.
-Excellent UV and weather resistance
Polyaspartic - (ANSWER)-Used to achieve low or near zero VOC systems
-pot lives from 5 minutes to several hours
-Film builds up to (15 mils) DFT in a single pass
Phenolic - (ANSWER)Typically used where low PH environments and Higher Temperature are
factors
latex (Emulsions) - (ANSWER)-Resins normally thermoplastic resin types
-Coalescence curing
(Non-convertible)
Furans - (ANSWER)-Applied by Brick layers not coating applicators.
-Not a common coating type
epoxy - (ANSWER)-Two parts, resin and hardener must be mixed.
-Can be solvent-based, water-based, or solvent-free
Alkyds - (ANSWER)-Oxidative curing
-Reffered to as "Oil Based Paints"
Page 3 of 21
