IRRSP FULLY SOLVED TEST PAPER GRADED A+
◉ neutrons.
Answer: Uncharged elementary particles with a weight slightly
higher than a proton are called:
◉ nucleus.
Answer: The area known as the center of an atom is called the:
◉ A number.
Answer: An element's atomic weight is also known as the:
◉ protons.
Answer: An element is identified by the number of _______ in its
nucleus.
◉ high-speed electrons are emitted from the cathode and strike the
target within a vacuum-sealed envelope.
Answer: X-radiation is produced when a supply of:
◉ free electrons, means of acceleration, and a target.
Answer: Three things needed to generate an x-ray are:
,◉ copper and tungsten.
Answer: The two most common materials used for the anode are:
◉ heat.
Answer: Most of the energy used in producing x-rays converts to:
◉ penetrating ability of the radiation.
Answer: The kilovoltage of an x-ray machine is mainly adjusted to
change the:
◉ directly proportional to the quantity of x-rays produced.
Answer: The milliamperage of an x-ray machine is:
◉ voltage, amperage, and time.
Answer: Three items that can be adjusted on an x-ray machine are:
◉ bremsstrahlung.
Answer: The process of an electron slowing down as it travels
around the nucleus of an atom and creating an x-ray is called:
◉ characteristic x-rays.
, Answer: The process of an inner orbital electron being ejected from
a target atom and having the vacancy filled by an outer orbital
electron which creates an x-ray is called:
◉ polychromatic radiation.
Answer: X-rays emitted from an x-ray machine are referred to as:
◉ beryllium.
Answer: Most x-ray tubes are fitted with a window made of:
◉ duty cycle.
Answer: The time-on to time-off that is needed for an x-ray machine
to cool down is called the:
◉ Survey the part because it could be radioactive.
Answer: What additional precautions are taken when performing
radiography above 10MeV?
◉ on the electrostatic principle.
Answer: Van de Graaff x-ray machines operate:
◉ in a 360° direction.
Answer: A rod anode x-ray machine will emit x-rays:
◉ neutrons.
Answer: Uncharged elementary particles with a weight slightly
higher than a proton are called:
◉ nucleus.
Answer: The area known as the center of an atom is called the:
◉ A number.
Answer: An element's atomic weight is also known as the:
◉ protons.
Answer: An element is identified by the number of _______ in its
nucleus.
◉ high-speed electrons are emitted from the cathode and strike the
target within a vacuum-sealed envelope.
Answer: X-radiation is produced when a supply of:
◉ free electrons, means of acceleration, and a target.
Answer: Three things needed to generate an x-ray are:
,◉ copper and tungsten.
Answer: The two most common materials used for the anode are:
◉ heat.
Answer: Most of the energy used in producing x-rays converts to:
◉ penetrating ability of the radiation.
Answer: The kilovoltage of an x-ray machine is mainly adjusted to
change the:
◉ directly proportional to the quantity of x-rays produced.
Answer: The milliamperage of an x-ray machine is:
◉ voltage, amperage, and time.
Answer: Three items that can be adjusted on an x-ray machine are:
◉ bremsstrahlung.
Answer: The process of an electron slowing down as it travels
around the nucleus of an atom and creating an x-ray is called:
◉ characteristic x-rays.
, Answer: The process of an inner orbital electron being ejected from
a target atom and having the vacancy filled by an outer orbital
electron which creates an x-ray is called:
◉ polychromatic radiation.
Answer: X-rays emitted from an x-ray machine are referred to as:
◉ beryllium.
Answer: Most x-ray tubes are fitted with a window made of:
◉ duty cycle.
Answer: The time-on to time-off that is needed for an x-ray machine
to cool down is called the:
◉ Survey the part because it could be radioactive.
Answer: What additional precautions are taken when performing
radiography above 10MeV?
◉ on the electrostatic principle.
Answer: Van de Graaff x-ray machines operate:
◉ in a 360° direction.
Answer: A rod anode x-ray machine will emit x-rays:
