1|Page
Cusp - T&D Exam |High Quality
Questions And Verified Answers 2026
CSAZ1006 requires the Entry Supervisor to execute certain duties in the field prior
to entering a confined space, including: - correct-answer-1. Ensuring those
entering the space are trained and competent.
2. Verifying that rescue procedures are in place and communication is
established.
3. Ensure that acceptable conditions are maintained for the duration of the entry.
Energized electrical cables inside underground chambers can be disturbed and
produce a hazardous environment. What precautions should be taken? - correct-
answer-1. Ensure that cables are held in place prior to undoing or cutting
fasteners.
2. Don't climb onto cables, junctions, connections, splices or supports.
3. Verify equipment condition if required to move cables, junctions or splices.
,2|Page
The roll of the attendant of a confined space electrical vault shall NOT do the
following: - correct-answer-Enter the space to provide assistance when required.
The roll of the attendant of a confined space electrical vault shall do the following:
- correct-answer-1. Maintain effective communication with workers in the space.
2. Keep an eye on potential hazards developing in and around the space.
3. Control unauthorized access into the space.
It is permissible to use an external retrieval rescue system under what following
condition: - correct-answer-There are no significant obstructions to the path of
rescue.
The frequency requirements for calibration of direct-read atmosphere testing
equipment is: - correct-answer-As per the manufacturers recommendations.
,3|Page
What must be conducted each time prior to entry into an energized electrical
space: - correct-answer-A risk assessment shall be performed to determine the
energy source hazards and controls.
The content of the confined space permit (where required) DOES NOT need to
contain: - correct-answer-Managers approval for entry into the space.
The content of the confined space permit (where required) must contain the
following: - correct-answer-1. The date and location entry.
2. Scope of work to be performed inside the space.
3. Record worker entry and exit.
A minimum of ___ cal/cm2 is to be worn by electrical workers. - correct-answer-8
cal/cm2
, 4|Page
A worker wearing an FR shirt with a rating of 12 cal/cm2 plus an undershirt that is
made of non-melting fabrics can have a combined total cal/cm2 of ___. - correct-
answer-12 cal/cm2
Arc FR clothing shall be cleaned according to what? - correct-answer-
Manufacturers recommendations.
Arc flash rated clothing shall be worn when: - correct-answer-There is a hazard of
arc flash.
ATPV stands for: - correct-answer-Arc Thermal Protective Value
Cusp - T&D Exam |High Quality
Questions And Verified Answers 2026
CSAZ1006 requires the Entry Supervisor to execute certain duties in the field prior
to entering a confined space, including: - correct-answer-1. Ensuring those
entering the space are trained and competent.
2. Verifying that rescue procedures are in place and communication is
established.
3. Ensure that acceptable conditions are maintained for the duration of the entry.
Energized electrical cables inside underground chambers can be disturbed and
produce a hazardous environment. What precautions should be taken? - correct-
answer-1. Ensure that cables are held in place prior to undoing or cutting
fasteners.
2. Don't climb onto cables, junctions, connections, splices or supports.
3. Verify equipment condition if required to move cables, junctions or splices.
,2|Page
The roll of the attendant of a confined space electrical vault shall NOT do the
following: - correct-answer-Enter the space to provide assistance when required.
The roll of the attendant of a confined space electrical vault shall do the following:
- correct-answer-1. Maintain effective communication with workers in the space.
2. Keep an eye on potential hazards developing in and around the space.
3. Control unauthorized access into the space.
It is permissible to use an external retrieval rescue system under what following
condition: - correct-answer-There are no significant obstructions to the path of
rescue.
The frequency requirements for calibration of direct-read atmosphere testing
equipment is: - correct-answer-As per the manufacturers recommendations.
,3|Page
What must be conducted each time prior to entry into an energized electrical
space: - correct-answer-A risk assessment shall be performed to determine the
energy source hazards and controls.
The content of the confined space permit (where required) DOES NOT need to
contain: - correct-answer-Managers approval for entry into the space.
The content of the confined space permit (where required) must contain the
following: - correct-answer-1. The date and location entry.
2. Scope of work to be performed inside the space.
3. Record worker entry and exit.
A minimum of ___ cal/cm2 is to be worn by electrical workers. - correct-answer-8
cal/cm2
, 4|Page
A worker wearing an FR shirt with a rating of 12 cal/cm2 plus an undershirt that is
made of non-melting fabrics can have a combined total cal/cm2 of ___. - correct-
answer-12 cal/cm2
Arc FR clothing shall be cleaned according to what? - correct-answer-
Manufacturers recommendations.
Arc flash rated clothing shall be worn when: - correct-answer-There is a hazard of
arc flash.
ATPV stands for: - correct-answer-Arc Thermal Protective Value
