FCR/RFI Questions with Verified Correct
Answers
The FCR will provide reliable data while maneuvering up to ? degrees in roll and ?
degrees to ? degrees in pitch
20° roll - +20° to -15° pitch
All priority schemes give higher priority to targets merged with ? and vary only with
respect to how unmerged targets are prioritized
MRFI emitters
Moving target symbols become stale after ? seconds.
Stationary target symbols become stale after ?seconds.
5 sec - 30 sec
Once the NTS target is frozen, and a target is detected that out-prioritizes the NTS
target, the ?symbol will flash for 3 seconds. The operator can select the cursor enter to
choose this target as the NTS
ANTS
MRFI symbols representing MRFI detected emitters are displayed on the periphery of
the radar scan sector to indicate the direction to the detected threat. How many MRFI
emitters can be displayed?
Up to 10
Selecting the button is a quick way to mode, point, size and initiate the FCR for a scan
Cued search
, MRFI symbols are displayed in full intensity during the period when the MRFI emitters
are emitting plus ? seconds after emitters cease transmissions
30 sec
When a threat is detected by the radar (RWR) or laser (LWR) warning receivers, an
ASE threat symbol is displayed along the ? perimeter of the TSD ASE footprint.
Inside
When a threat is detected by the MRFI, an MRFI threat icon symbol is displayed along
the ? the perimeter of the ASE footprint.
Outside
What are the 5 FCR modes
GTM/RMAP - MTM - ATM -TPM - Surveillance
Maritime Mode is enabled by having the ? (B4) selected and using the ? position of the
Mode selection switch on the Left Hand Grip or Collective
M
When FCR target data is displayed, switching from RMAP to GTM will display info. in
the selected format. Selecting ? or ? will eliminate all ground targeting data. Can
eliminated ground target data be recalled?
ATM or TPM - No
Scan-to-scan ? is a process which maintains track of detected targets between each scan
Correlation
Answers
The FCR will provide reliable data while maneuvering up to ? degrees in roll and ?
degrees to ? degrees in pitch
20° roll - +20° to -15° pitch
All priority schemes give higher priority to targets merged with ? and vary only with
respect to how unmerged targets are prioritized
MRFI emitters
Moving target symbols become stale after ? seconds.
Stationary target symbols become stale after ?seconds.
5 sec - 30 sec
Once the NTS target is frozen, and a target is detected that out-prioritizes the NTS
target, the ?symbol will flash for 3 seconds. The operator can select the cursor enter to
choose this target as the NTS
ANTS
MRFI symbols representing MRFI detected emitters are displayed on the periphery of
the radar scan sector to indicate the direction to the detected threat. How many MRFI
emitters can be displayed?
Up to 10
Selecting the button is a quick way to mode, point, size and initiate the FCR for a scan
Cued search
, MRFI symbols are displayed in full intensity during the period when the MRFI emitters
are emitting plus ? seconds after emitters cease transmissions
30 sec
When a threat is detected by the radar (RWR) or laser (LWR) warning receivers, an
ASE threat symbol is displayed along the ? perimeter of the TSD ASE footprint.
Inside
When a threat is detected by the MRFI, an MRFI threat icon symbol is displayed along
the ? the perimeter of the ASE footprint.
Outside
What are the 5 FCR modes
GTM/RMAP - MTM - ATM -TPM - Surveillance
Maritime Mode is enabled by having the ? (B4) selected and using the ? position of the
Mode selection switch on the Left Hand Grip or Collective
M
When FCR target data is displayed, switching from RMAP to GTM will display info. in
the selected format. Selecting ? or ? will eliminate all ground targeting data. Can
eliminated ground target data be recalled?
ATM or TPM - No
Scan-to-scan ? is a process which maintains track of detected targets between each scan
Correlation
