OSHA Basic Orientation Plus 54
UPDATED ACTUAL Exam Questions and CORRECT Answers
Question 1.
What key elements are essential to recognizing hazards and reducing or eliminating
workplace hazards?
Correct Answer: Management commitment and employee involvement
Question 2.
You are encouraged to ask your coworkers/supervisor for information whenever you
have a problem or are in doubt about what to do on a job?
Correct Answer: True
Question 3.
It is your responsibility to follow all safety regulations, inform your employer of any
unsafe condition; report all injuries no matter how minor they seem and wear the proper
personal protective equipment?
Correct Answer: True
Question 4.
The OSHA standard that addresses the requirements for preventing and lessening the
results of a bad release of toxic, reactive, flammable, or highly explosive hazardous
chemicals from a process
Correct Answer: Process safety management Standard
Question 5.
The process Hazard Analysis (PHA) is one of the most important parts of the PSM
program. PHAs are used to identify and evaluate major processes and ensure they are
Correct Answer: Evaluated, Controlled, and Identified
Question 6.
In the PSM standard OSHA states employees must be trained if they work with highly
hazardous chemicals.
Correct Answer: True
• Facilities are not permitted to control your entrance and exit in covered
process areas. -✓✓False
, Question 7.
What should be your first concern from the moment you enter the work site?
Correct Answer: Safety
Question 8.
Under the Stop Work Authority, you have the right and obligation to stop a work activity
if you have reason to believe your own safety or a coworkers safety is in jeopardy or if
the work plan is not clearly established or understood .
Correct Answer: True
Question 9.
What's needed in order to operate a plant-owned vehicle or mobile equipment while at a
facility
Correct Answer: qualified only authorized only
Question 10.
What type of work permits you may encounter on the job
Correct Answer: safe work permits confined space entry permits, hot work
permits, line entry or line breaking permits, lockout/tagout permits
Question 11.
if you are replacing a piece of equipment the new one should be the same as the one
being removed. If its not you should find out whether the change was on purpose. what
is this called
Correct Answer: Management of change
Question 12.
Used only where an immediate life threatening hazard exists
Correct Answer: Danger
Question 13.
Used where immediate non life threatening hazards exist
Correct Answer: Warning Sign
Question 14.
Used to warn against potential hazards or to caution against unsafe practices
UPDATED ACTUAL Exam Questions and CORRECT Answers
Question 1.
What key elements are essential to recognizing hazards and reducing or eliminating
workplace hazards?
Correct Answer: Management commitment and employee involvement
Question 2.
You are encouraged to ask your coworkers/supervisor for information whenever you
have a problem or are in doubt about what to do on a job?
Correct Answer: True
Question 3.
It is your responsibility to follow all safety regulations, inform your employer of any
unsafe condition; report all injuries no matter how minor they seem and wear the proper
personal protective equipment?
Correct Answer: True
Question 4.
The OSHA standard that addresses the requirements for preventing and lessening the
results of a bad release of toxic, reactive, flammable, or highly explosive hazardous
chemicals from a process
Correct Answer: Process safety management Standard
Question 5.
The process Hazard Analysis (PHA) is one of the most important parts of the PSM
program. PHAs are used to identify and evaluate major processes and ensure they are
Correct Answer: Evaluated, Controlled, and Identified
Question 6.
In the PSM standard OSHA states employees must be trained if they work with highly
hazardous chemicals.
Correct Answer: True
• Facilities are not permitted to control your entrance and exit in covered
process areas. -✓✓False
, Question 7.
What should be your first concern from the moment you enter the work site?
Correct Answer: Safety
Question 8.
Under the Stop Work Authority, you have the right and obligation to stop a work activity
if you have reason to believe your own safety or a coworkers safety is in jeopardy or if
the work plan is not clearly established or understood .
Correct Answer: True
Question 9.
What's needed in order to operate a plant-owned vehicle or mobile equipment while at a
facility
Correct Answer: qualified only authorized only
Question 10.
What type of work permits you may encounter on the job
Correct Answer: safe work permits confined space entry permits, hot work
permits, line entry or line breaking permits, lockout/tagout permits
Question 11.
if you are replacing a piece of equipment the new one should be the same as the one
being removed. If its not you should find out whether the change was on purpose. what
is this called
Correct Answer: Management of change
Question 12.
Used only where an immediate life threatening hazard exists
Correct Answer: Danger
Question 13.
Used where immediate non life threatening hazards exist
Correct Answer: Warning Sign
Question 14.
Used to warn against potential hazards or to caution against unsafe practices
