OSHA 510
UPDATED ACTUAL Exam Questions and CORRECT Answers
Question 1.
At what heights do we need to brace masonry walls?
Correct Answer: 8 feet
Question 2.
What is the minimum clearance distance between sprinkler heads and material in
storage?
Correct Answer: 36 inches
Question 3.
What is the minimum distance between side rails on a portable ladder?
Correct Answer: 11.5 inches
Question 4.
What should we do with damaged ladders on OSHA Terms ?
Correct Answer: Remove from service
Question 5.
Who should approve any attachment that we put on a forklift that can affect capacity ?
Correct Answer: The Manufacturers
Question 6.
If we take the rollover protective structure off a piece of equipment, the bolts should be
Correct Answer: Equal to or better bolts than the original grade
Question 7.
At what degree from horizontal do we have to enclose a shoot in demo operations ?
Correct Answer: 45 degrees
Question 8.
When should a danger sign be used ?
Correct Answer: When an immediate hazard exists
, Question 9.
Who is responsible to ensure that electrical equipment is free from damage?
Correct Answer: The Employer
Question 10.
What type of wiring do assured equipment grounding conductor programs apply to?
Correct Answer: Non permanent
Question 11.
What voltage do we have to guard from live parts?
Correct Answer: 50 Volts or greater
Question 12.
At what heights to base-width ratio do we have to tie a scaffold to a building?
Correct Answer: 4:1 Ratio
• What is the unconfined compressive strength of type B soil ? -✓✓Greater
than 0.5, Less than 1.5
Question 13.
If a Competent person can't tell if a trench box has too much damage to use, who should
they consult with ?
Correct Answer: A Professional Engineer
Question 14.
What size company does not have to comply with record keeping ?
Correct Answer: Companies with 10 or fewer employee
Question 15.
What are the results of workplace injuries and illness ?
Correct Answer: Low morale and increased cost to train replacement workers
Question 16.
What is the incident rate based on ?
Correct Answer: The number of injuries per 100 full time workers
UPDATED ACTUAL Exam Questions and CORRECT Answers
Question 1.
At what heights do we need to brace masonry walls?
Correct Answer: 8 feet
Question 2.
What is the minimum clearance distance between sprinkler heads and material in
storage?
Correct Answer: 36 inches
Question 3.
What is the minimum distance between side rails on a portable ladder?
Correct Answer: 11.5 inches
Question 4.
What should we do with damaged ladders on OSHA Terms ?
Correct Answer: Remove from service
Question 5.
Who should approve any attachment that we put on a forklift that can affect capacity ?
Correct Answer: The Manufacturers
Question 6.
If we take the rollover protective structure off a piece of equipment, the bolts should be
Correct Answer: Equal to or better bolts than the original grade
Question 7.
At what degree from horizontal do we have to enclose a shoot in demo operations ?
Correct Answer: 45 degrees
Question 8.
When should a danger sign be used ?
Correct Answer: When an immediate hazard exists
, Question 9.
Who is responsible to ensure that electrical equipment is free from damage?
Correct Answer: The Employer
Question 10.
What type of wiring do assured equipment grounding conductor programs apply to?
Correct Answer: Non permanent
Question 11.
What voltage do we have to guard from live parts?
Correct Answer: 50 Volts or greater
Question 12.
At what heights to base-width ratio do we have to tie a scaffold to a building?
Correct Answer: 4:1 Ratio
• What is the unconfined compressive strength of type B soil ? -✓✓Greater
than 0.5, Less than 1.5
Question 13.
If a Competent person can't tell if a trench box has too much damage to use, who should
they consult with ?
Correct Answer: A Professional Engineer
Question 14.
What size company does not have to comply with record keeping ?
Correct Answer: Companies with 10 or fewer employee
Question 15.
What are the results of workplace injuries and illness ?
Correct Answer: Low morale and increased cost to train replacement workers
Question 16.
What is the incident rate based on ?
Correct Answer: The number of injuries per 100 full time workers
