IFC PREMIER FIRESTOP COMPREHENSIVE
EXAM STUDY GUIDE WITH COMPLETE
SOLUTIONS
●● ASTM E 2174
Answer: Standard practice for on- site inspection of installed fire stop
●● ASTM E 2393
Answer: Standard practice for on-site inspection of installed fire
resistive joint system and perimeter fire barriers
●● ASTM E 2307
Answer: Determines the period of time that the perimeter fire
containment system will limit flame penetration through the opening
between the exterior wall assembly and the floor assembly
●● Is hose stream test required for ASTM E 2307
Answer: No
●● ASTM E 2336 (UL 1978)
Answer: Standard test method for fire resistive grease duct enclosure
systems
, ●● ISO 6944
Answer: Fire resistive tests for ventilation ducts
●● ICC ES AC179
Answer: Acceptance criteria for metallic HVAC duct enclosure
assemblies
(Passive fire protection for commercial kitchen exhaust ducts)
●● ASTM E2750
Answer: Standard guide for extension of data from Firestop penetration
system tests conducted in accordance with ASTM E814
●● Movement class I (thermal expansion/contraction joint)
Answer: (500 cycles, 1 cycle/min)
●● Movement class III (seismic)
Answer: (100 Cycles; 30 cycles/min
●● Movement class III combination
Answer: 100 cycles; 10 cycles/min
●● ASTM C1241
EXAM STUDY GUIDE WITH COMPLETE
SOLUTIONS
●● ASTM E 2174
Answer: Standard practice for on- site inspection of installed fire stop
●● ASTM E 2393
Answer: Standard practice for on-site inspection of installed fire
resistive joint system and perimeter fire barriers
●● ASTM E 2307
Answer: Determines the period of time that the perimeter fire
containment system will limit flame penetration through the opening
between the exterior wall assembly and the floor assembly
●● Is hose stream test required for ASTM E 2307
Answer: No
●● ASTM E 2336 (UL 1978)
Answer: Standard test method for fire resistive grease duct enclosure
systems
, ●● ISO 6944
Answer: Fire resistive tests for ventilation ducts
●● ICC ES AC179
Answer: Acceptance criteria for metallic HVAC duct enclosure
assemblies
(Passive fire protection for commercial kitchen exhaust ducts)
●● ASTM E2750
Answer: Standard guide for extension of data from Firestop penetration
system tests conducted in accordance with ASTM E814
●● Movement class I (thermal expansion/contraction joint)
Answer: (500 cycles, 1 cycle/min)
●● Movement class III (seismic)
Answer: (100 Cycles; 30 cycles/min
●● Movement class III combination
Answer: 100 cycles; 10 cycles/min
●● ASTM C1241