ACTUAL 2026/2027 HIGH YIELD PRACTICE QUESTIONS AND STUDY
GUIDE ACCURATE EXAM COMPLETE APPROVED QUESTIONS
WITH WELL ELABORATED SOLUTIONS AND DETAILED
RATIONALES (100% CORRECT VERIFIED ANSWERS) CURRENTLY
UPDATED VERSION 2026 EDITION |GUARANTEED PASS A+ |FULL
REVISED NC BUILDING INSPECTOR LEVEL II CERTIFICATION
EXAM | INSTANT DOWNLOAD PDF
1. Which North Carolina General Statute authorizes the building
official to issue a Stop Work Order?
A) G.S. 143-45
B) G.S. 143-42 CORRECT ANSWER
C) G.S. 143-48
D) G.S. 143-50
Rationale: G.S. 143-42 grants the building official the authority to
issue a Stop Work Order when construction is proceeding in
violation of the code. This is a fundamental enforcement tool for
code officials in North Carolina.
2. The permit applicant must submit which of the following
documents before the issuance of a building permit for a new
commercial structure?
A) Contractor's license only
B) Completed plans, specifications, and a soil report CORRECT
ANSWER
,C) Proof of insurance only
D) Energy code compliance certificate only
Rationale: Complete plans, specifications, and a geotechnical soil
report are required to verify compliance with the building code
before a permit is issued for a commercial structure. This ensures
that the proposed construction meets all structural and safety
requirements.
3. Under Level II certification, an inspector is authorized to perform
which of the following inspections?
A) Structural steel welding inspections for high-rise towers
B) Fire alarm system testing for all occupancies
C) Final inspection of residential one-family dwellings only
D) Inspection of fire-resistive wall assemblies in commercial
buildings CORRECT ANSWER
Rationale: Level II inspectors are authorized to inspect fire-
resistive wall assemblies in commercial buildings. They are not
authorized to perform specialized high-rise steel welding
inspections or full fire alarm testing for all occupancies, which
require additional certifications.
,4. What is the primary purpose of the North Carolina Building
Code?
A) To regulate construction contracts
B) To protect public health, safety, and general welfare CORRECT
ANSWER
C) To determine insurance rates
D) To provide architectural design guidelines
Rationale: The North Carolina Building Code exists to ensure the
health, safety, and general welfare of the public by establishing
minimum construction standards for buildings and structures.
5. In commercial buildings, the minimum width of an accessible
route must be:
A) 30 inches
B) 32 inches
C) 36 inches CORRECT ANSWER
D) 40 inches
Rationale: Accessible routes in commercial buildings must be at
least 36 inches wide to accommodate wheelchairs and comply with
accessibility standards. This width allows for safe and
unobstructed passage.
, 6. Fire resistance ratings are determined by which document?
A) ICC A117.1
B) International Building Code (IBC) CORRECT ANSWER
C) NFPA 70
D) ANSI Standards
Rationale: The International Building Code (IBC) specifies fire
resistance ratings for building elements, including walls, floors,
and structural members. These ratings are based on standardized
fire tests and are essential for ensuring building safety.
7. A Type IIB construction classification means:
A) Fire-resistive structural frame
B) Non-combustible materials with no fire-resistance rating
CORRECT ANSWER
C) Heavy timber construction
D) Wood frame with fire sprinklers
Rationale: Type IIB construction uses non-combustible materials
but does not require a fire-resistance rating for structural elements.
This classification is commonly used for buildings where fire