• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 3 fuera de 30 páginas
Examen

Texas Mold Assessment Consultant Exam Questions and Answers

Document preview thumbnail
Vista previa 3 fuera de 30 páginas

Texas Mold Assessment Consultant Exam Questions and Answers

Vista previa del contenido

Texas Mold Assessment Consultant Exam
Questions and Answers
Question 1
according to the Texas mold assessment and remediation rules, a licensed mold
assessment company or consultant shall maintain records until
Correct Answer
the company or consultant issues a mold assessment report, management plan, or
remediation protocol to a client, if the company or consultant performs. only the
initial assessment for the project / the company or consultant issues the final. status
report to the client, if a. final status report is issued / and the company or consultant
provides the. signed. certificate of mold remediation to a mold remediation
contractor or company, if a certificate of mold remediation is provided



Question 2
according to the Texas mold assessment and remediation rules, if a walking
containment is used the Post remediation assessment shall be performed
Correct Answer
while the containment is in place



Question 3
according to the Texas mold assessment and remediation rules a critical violation
have or may have
Correct Answer
a direct negative impact on public health, safety or welfare




Page 1 of 30

,Question 4
according to the Texas mold assessment and remediation rules, the certificate of
insurance must be complete, including all applicable coverages and endorsements,
and must name as a certificate holder the
Correct Answer
Texas Department of license and registration (TDLR)



Question 5
Non-porous, Hard-surfaces (10 sq ft or less)
(Plastics, Metals)
Correct Answer
Wet vacuum (in case of porous materials, some mold spores/fragments will remain
in the material but will not grow if the material is completely dried.) Steam cleaning
may be an alternative for carpets and some upholstered furniture.
Damp-Wipe surfaces with plain water or with water and detergent solution (except
wood - use wood floor cleaner); scrub as needed.
High Efficiency Particulate Air (HEPA) vacuum after the material has been thoroughly
dried. Dispose of contents of the HEPA vacuum area after it is dried.



Question 6
Non-porous, Hard-surfaces (more than 100 sq ft)
(Plastics, Metals)
Correct Answer
Wet vacuum (in case of porous materials, some mold spores/fragments will remain
in the material but will not grow if the material is completely dried.) Steam cleaning
may be an alternative for carpets and some upholstered furniture.
Damp-Wipe surfaces with plain water or with water and detergent solution (except
wood - use wood floor cleaner); scrub as needed.
High Efficiency Particulate Air (HEPA) vacuum after the material has been thoroughly
dried. Dispose of contents of the HEPA vacuum area after it is dried.




Page 2 of 30

, Question 7
according to the Texas mold assessment and remediation rules, containment is not
required for a contaminated area of less than
Correct Answer
25 continguous square feet



Question 8
according to the Texas mold assessment and remediation rules, the start date is
defined as

Correct Answer
the date on which the actual remediation begins



Question 9
Carpet &backing (10-100 sq ft)
Correct Answer
Wet vacuum (in case of porous materials, some mold spores/fragments will remain
in the material but will not grow if the material is completely dried.) Steam cleaning
may be an alternative for carpets and some upholstered furniture.
High Efficiency Particulate Air (HEPA) vacuum after the material has been thoroughly
dried. Dispose of contents of the HEPA vacuum area after it is dried.
Discard - Remove water damaged materials and seal in plastic bags while inside of
containment, if present. Dispose of as normal waste, HEPA vacuum area after it has
dried.



Question 10
according to the Texas mold assessment and remediation rules, and inspection,
investigation, or survey of a dwelling or other structure to provide the owner of
occupant with information regarding the presence, identification, or evaluation of
mold is
Correct Answer
a mold assessment




Page 3 of 30

Información del documento

Subido en
30 de septiembre de 2026
Número de páginas
30
Escrito en
2026/2027
Tipo
Examen
Contiene
Preguntas y respuestas
$17.99

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
TutorExpert
3.7
(79)
Vendido
616
Seguidores
315
Artículos
11197
Última venta
2 días hace



Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes