Tosca Tricentis AS1 Exam Latest 2026 Updated
Questions and Verified 100% Solutions (2026/2027)
Grade: A+|Status: Guaranteed Pass
What is the ScratchBook? - Answers -The ScratchBook is a Tosca built-in capability that allows
you to perform trial runs of your TestSteps and TestCases.
Such trial runs create only a temporary result. This temporary result is not saved and will be
overwritten once you'll run a new TestCase or TestStep in the ScratchBook.
After execution, the results will appear in the ScratchBook. If a TestStep fails, a red X appears
next to the step with log info, explaining what the error was. When everything runs correctly,
the steps are marked with a green check mark.
What is the syntax of the Buffer? - Answers -{B[BufferName]}
How to see the Buffer values? - Answers -To see the Buffers directly in the WorkSpace view,
navigate to the Tool section on the Ribbon. Here, you can find the "Buffer Viewer". In this
window, you can see all the Buffers stored in Tosca. On the left is the Buffer Name, and on the
right is the Buffer Value.
How could you use a randomly generated value again? - Answers -Buffering the value after its
first creation.
1|Page
,How the Dynamic Expressions are used? - Answers -You'll use Dynamic Expressions if you need
to specify values in your TestCases that are not generated until those particular TestCases are
executed.
What is the syntax of the Test configuration parameter TCP? - Answers -
{CP[Testconfigurationparameter]}
What is an XBuffer? - Answers -Used for reading out and buffering dynamic parts of a string for
Dynamic Comparison.
When using the command {XB[Value]}, what is the meaning of the value inside the []? - Answers
-The name of the Buffer.
What is the syntax for Integer Random Values? - Answers -Syntax 1 - {RND[Length of random
number]}
Example: {RND[7]} - Create a 7-digit number
Syntax 2 - {RND[Lower limit][Upper limit]}
Example: {RND[-789][123]} - Creates an integer number between -789 and 123
What is the syntax for Decimals Random Values? - Answers -Syntax 1 - {RNDDECIMAL[Length of
random number][Decimal places]}
2|Page
, Example : {RNDDECIMAL[5][2]} - Creates a 5-digit random number with two decimal places.
Syntax 2 - {RNDDECIMAL[Decimal places][Lower limit][Upper limit]}
Example: {RNDDECIMAL[4][130][200]} Creates an integer number between 130 and 200 with
four decimal places.
What is the syntax for Random Strings? - Answers -Syntax - {RANDOMTEXT[String length]}
Example: {RANDOMTEXT[12]} - Creates a random text of 12 characters
The maximum length of the string is limited to 1024.
What is the syntax for Random Strings with Regular Expressions? - Answers -Syntax -
{RANDOMREGEX["Regular expression"]}
Example - {RANDOMREGEX["^[A-Z][a-z]+[0-9]{4}$"]} Creates a value that starts with a capital
letter between A and Z, followed by any number of lower-case letters and exactly four digits
between 0 and 9. The ^ character marks the beginning of the line, and $ marks the end of the
line.
What is the syntax for Dynamic Date Time expressions? - Answers -
{<EXPRESSION>[<BASEDATE>][<OFFSET>][<FORMAT>]}
for example
{DATE} - Full date (30.04.2021)
{TIME} - Current time (15:09)
{DATETIME} - Current timestamp (20151230150914)
{DAY} - Current day (30)
3|Page
Questions and Verified 100% Solutions (2026/2027)
Grade: A+|Status: Guaranteed Pass
What is the ScratchBook? - Answers -The ScratchBook is a Tosca built-in capability that allows
you to perform trial runs of your TestSteps and TestCases.
Such trial runs create only a temporary result. This temporary result is not saved and will be
overwritten once you'll run a new TestCase or TestStep in the ScratchBook.
After execution, the results will appear in the ScratchBook. If a TestStep fails, a red X appears
next to the step with log info, explaining what the error was. When everything runs correctly,
the steps are marked with a green check mark.
What is the syntax of the Buffer? - Answers -{B[BufferName]}
How to see the Buffer values? - Answers -To see the Buffers directly in the WorkSpace view,
navigate to the Tool section on the Ribbon. Here, you can find the "Buffer Viewer". In this
window, you can see all the Buffers stored in Tosca. On the left is the Buffer Name, and on the
right is the Buffer Value.
How could you use a randomly generated value again? - Answers -Buffering the value after its
first creation.
1|Page
,How the Dynamic Expressions are used? - Answers -You'll use Dynamic Expressions if you need
to specify values in your TestCases that are not generated until those particular TestCases are
executed.
What is the syntax of the Test configuration parameter TCP? - Answers -
{CP[Testconfigurationparameter]}
What is an XBuffer? - Answers -Used for reading out and buffering dynamic parts of a string for
Dynamic Comparison.
When using the command {XB[Value]}, what is the meaning of the value inside the []? - Answers
-The name of the Buffer.
What is the syntax for Integer Random Values? - Answers -Syntax 1 - {RND[Length of random
number]}
Example: {RND[7]} - Create a 7-digit number
Syntax 2 - {RND[Lower limit][Upper limit]}
Example: {RND[-789][123]} - Creates an integer number between -789 and 123
What is the syntax for Decimals Random Values? - Answers -Syntax 1 - {RNDDECIMAL[Length of
random number][Decimal places]}
2|Page
, Example : {RNDDECIMAL[5][2]} - Creates a 5-digit random number with two decimal places.
Syntax 2 - {RNDDECIMAL[Decimal places][Lower limit][Upper limit]}
Example: {RNDDECIMAL[4][130][200]} Creates an integer number between 130 and 200 with
four decimal places.
What is the syntax for Random Strings? - Answers -Syntax - {RANDOMTEXT[String length]}
Example: {RANDOMTEXT[12]} - Creates a random text of 12 characters
The maximum length of the string is limited to 1024.
What is the syntax for Random Strings with Regular Expressions? - Answers -Syntax -
{RANDOMREGEX["Regular expression"]}
Example - {RANDOMREGEX["^[A-Z][a-z]+[0-9]{4}$"]} Creates a value that starts with a capital
letter between A and Z, followed by any number of lower-case letters and exactly four digits
between 0 and 9. The ^ character marks the beginning of the line, and $ marks the end of the
line.
What is the syntax for Dynamic Date Time expressions? - Answers -
{<EXPRESSION>[<BASEDATE>][<OFFSET>][<FORMAT>]}
for example
{DATE} - Full date (30.04.2021)
{TIME} - Current time (15:09)
{DATETIME} - Current timestamp (20151230150914)
{DAY} - Current day (30)
3|Page
