NACE CIP 1 CBT Exam (Quizzes and Study Questions) Solved Correctly Latest Update 2027, Graded A+

NACE CIP 1 CBT Exam (Quizzes and Study Questions) Solved
Correctly Latest Update 2027, Graded A+

Question 1.
How is the process of steel corrosion ALWAYS described?

Correct Answer: electrochemical


Question 2.
Based on the galvanic series presented in the NACE CIP Level 1 Manual, which three can
be used effectively as galvanic anodes for carbon steel?

Correct Answer: zinc, aluminum, magnesium


Question 3.
A decrease in temperature will generally cause the corrosion rate to _____

Correct Answer: decrease


Question 4.
The electrolyte is a medium which carries the following type of current?

Correct Answer: Ionic


Question 5.
Corrosion occurring uniformly across a surface is called _____

Correct Answer: general corrosion


Question 6.
When a conflict occurs on a coatings project, as the inspector, the preferred first course of
action is to _____

Correct Answer: actively listen and endeavor to understand the positions of
others


Question 7.
A proper coating specification should contain information regarding ____, ____, and ____

Correct Answer: surface preparation standards, safety, and locations to be used

,Question 8.
Is it ever okay to accept a gift from a contractor?

Correct Answer: NO


Question 9.
What should you do if you find discrepancies between the specification and the coating
manufacturer's technical data sheet?

Correct Answer: seek written clarification from the owner's representative


Question 10.
What are the general components of inspection reports?

Correct Answer: - results of inspection tests
- location(s) of work
- details of preparation and application


Question 11.
Inspection reports typically provide sufficient detail permitting the owner to evaluate ___
___ ___ ___

Correct Answer: - contractor's performance
- inspector's performance
- job progress
- work interruptions


Question 12.
As an inspector headed to the job site for the first time, where would you always find
instruction regarding appropriate types of PPE?

Correct Answer: Safety Data Sheet (SDS), previously called MSDS


Question 13.
Materials inventory report should contain which of the following?

Correct Answer: - quantity of each component of each material onsite
- material batch numbers
- date of materials arrival at job site and storage information


Question 14.
The primary function of the coating inspector is _____

Correct Answer: specification compliance

,Question 15.
High humidity in the air during coating application can cause _____

Correct Answer: solvent entrapment


Question 16.
The temperature at which moisture condenses on a surface is called _____

Correct Answer: dew point


Question 17.
Where should the steel surface temperature reading be taken?

Correct Answer: at the actual work location


Question 18.
What type of water should be added to a sling psychrometer?

Correct Answer: distilled


Question 19.
Which type of coating is manufactured with the specific components added to slow down
the activity of the electrochemical cell?

Correct Answer: inhibitive


Question 20.
Which coating component forms a stable film that retains its characteristic properties?

Correct Answer: binder/resin


Question 21.
A barrier coating interrupts the ______ of the electrochemical cell.

Correct Answer: electrolyte


Question 22.
List the three mechanisms by which coatings adhere to a substrate

Correct Answer: 1. Polar
2. Chemical
3. Mechanical

, Question 23.
What is the rule for coating work when it comes to Dew Point and Steel Temperature?

Correct Answer: Steel Temperature must be 5 degrees less than the Dew Point


Question 24.
What characteristics of solvents influence coatings?

Correct Answer: - solvency power
- volatility


Question 25.
The contractor's sling psychrometer gives a different reading than your electric
hygrometer. What would you do first as an inspector?

Correct Answer: verify calibration of both instruments


Question 26.
Which of the following coating are co-re- acting?

Correct Answer: - polyurethane
- epoxy


Question 27.
Fusion Bond Epoxy (FBE) is most commonly used to coat ____

Correct Answer: pipe


Question 28.
Which coatings may require external moisture to cure?

Correct Answer: - single component polyurethane
- solvent borne inorganic zinc


Question 29.
Amine blush is likely to occur with which type of coating?

Correct Answer: epoxy


Question 30.
Which type of coating cures the fastest?

Correct Answer: Polyurea