,This study document brings together 149 carefully worded exam questions drawn from Texas
Safety Inspection Final EXAM Questions & Answers, Well Elaborated Already Verified Test 100%
Verified solutions 2026 Latest!!, with the strongest emphasis placed on Apply Texas Transportation
Code and 37 TAC inspection standards to determine pass/fail/reject decisions for complex vehicle
conditions, Differentiate among safety-only, emissions, and commercial inspection requirements
based on vehicle class, GVWR, and county of registration, Evaluate inspection station records,
certificates and and inspector conduct for compliance and fraud indicators. Every item follows the
wording style and level of reasoning you meet in the real paper, and each one is paired with a clear
rationale so the correct choice is never a guess. Work through the set at your own pace, mark the
questions that slow you down, then come back to them until the reasoning feels automatic.
Learners who revise this way walk into the exam room recognising the pattern behind the
questions instead of meeting them for the first time. Keep going - steady, honest practice is what
turns a difficult paper into a comfortable pass.
Q1 APPLY TEXAS TRANSPORTATION CODE AND 37 TAC INSPECTION STANDARDS TO
DETERMINE PASS/FAIL/REJECT DECISIONS FOR COMPLEX VEHICLE CONDITIONS
A vehicle registered in a county that has discontinued safety inspections presents
at a station for an inspection sticker. Under current Texas law, which action is
correct?
A. Perform a full safety inspection and issue a passing certificate.
B. Perform only an emissions inspection if the county is an emissions county.
C. Refuse inspection and explain that no safety inspection sticker is required or issued.
CORRECT
D. Issue a one-year exemption sticker after verifying insurance.
RATIONALE: As of 2025, Texas eliminated the annual safety inspection sticker for
non-commercial vehicles in most counties; registration-based enforcement replaced it. Emissions
testing still applies only in designated counties for certain model years. Issuing a safety sticker
where none is authorized constitutes a violation.
Page 2
,Q2 APPLY TEXAS TRANSPORTATION CODE AND 37 TAC INSPECTION STANDARDS TO
DETERMINE PASS/FAIL/REJECT DECISIONS FOR COMPLEX VEHICLE CONDITIONS
During a brake inspection, a vehicle exhibits a brake pedal that sinks slowly to the
floor when held under steady pressure. Which condition does this most likely
indicate, and what is the correct disposition?
A. Normal operation; pass the vehicle.
B. Air in the hydraulic system or a fluid leak; reject the vehicle. CORRECT
C. Worn brake pads; advise repair but pass.
D. Faulty parking brake; reject only if parking brake fails.
RATIONALE: A sinking pedal under steady pressure indicates a hydraulic leak or internal master
cylinder bypass, a critical safety defect. Texas inspection standards require rejection because
service brake performance is compromised. Normal operation would hold firm pressure; worn
pads alone do not cause a sinking pedal.
Q3 APPLY TEXAS TRANSPORTATION CODE AND 37 TAC INSPECTION STANDARDS TO
DETERMINE PASS/FAIL/REJECT DECISIONS FOR COMPLEX VEHICLE CONDITIONS
Which of the following best describes the Texas rule regarding inspection station
signage and certificate security?
A. Signage is optional if the station is mobile.
B. Certificates must be stored in a locked container, and signage must display the station's
certificate number. CORRECT
C. Certificates may be pre-signed by the station owner for inspector convenience.
D. Signage must be in English only.
RATIONALE: Texas DPS requires secure storage of inspection certificates and public display of
the station's certificate number. Pre-signing certificates is prohibited and constitutes fraud.
Signage requirements do not mandate English-only, and mobile stations must still comply with
signage rules.
Page 3
, Q4 APPLY TEXAS TRANSPORTATION CODE AND 37 TAC INSPECTION STANDARDS TO
DETERMINE PASS/FAIL/REJECT DECISIONS FOR COMPLEX VEHICLE CONDITIONS
A vehicle's headlamps are aimed such that the high beam is 4 inches above
horizontal at 25 feet. According to Texas inspection specifications, what is the
correct action?
A. Pass; aim is within tolerance.
B. Reject; high beam must be aimed below horizontal. CORRECT
C. Pass if low beam is correctly aimed.
D. Reject only if glare is reported by other drivers.
RATIONALE: Texas requires headlamp aim within specified limits: high beam should be aimed
slightly below horizontal or within a tolerance that prevents glare. A 4-inch rise at 25 feet exceeds
allowable upward aim, causing glare and failing inspection. Low beam aim does not excuse high
beam misalignment.
Q5 APPLY TEXAS TRANSPORTATION CODE AND 37 TAC INSPECTION STANDARDS TO
DETERMINE PASS/FAIL/REJECT DECISIONS FOR COMPLEX VEHICLE CONDITIONS
Which of the following is a valid reason to reject a vehicle during a Texas safety
inspection for window tint?
A. Tint on rear side windows is darker than 35% VLT.
B. Tint on front side windows is darker than 25% VLT.
C. Tint on windshield extends below the AS-1 line.
D. All of the above. CORRECT
RATIONALE: Texas tint laws: front side windows must allow 25% VLT, rear side windows 25% if
no rearview mirror, windshield tint must not extend below AS-1 line and must be 25% VLT. Any
violation is a rejection. Thus all listed conditions are grounds for rejection.
Page 4
Safety Inspection Final EXAM Questions & Answers, Well Elaborated Already Verified Test 100%
Verified solutions 2026 Latest!!, with the strongest emphasis placed on Apply Texas Transportation
Code and 37 TAC inspection standards to determine pass/fail/reject decisions for complex vehicle
conditions, Differentiate among safety-only, emissions, and commercial inspection requirements
based on vehicle class, GVWR, and county of registration, Evaluate inspection station records,
certificates and and inspector conduct for compliance and fraud indicators. Every item follows the
wording style and level of reasoning you meet in the real paper, and each one is paired with a clear
rationale so the correct choice is never a guess. Work through the set at your own pace, mark the
questions that slow you down, then come back to them until the reasoning feels automatic.
Learners who revise this way walk into the exam room recognising the pattern behind the
questions instead of meeting them for the first time. Keep going - steady, honest practice is what
turns a difficult paper into a comfortable pass.
Q1 APPLY TEXAS TRANSPORTATION CODE AND 37 TAC INSPECTION STANDARDS TO
DETERMINE PASS/FAIL/REJECT DECISIONS FOR COMPLEX VEHICLE CONDITIONS
A vehicle registered in a county that has discontinued safety inspections presents
at a station for an inspection sticker. Under current Texas law, which action is
correct?
A. Perform a full safety inspection and issue a passing certificate.
B. Perform only an emissions inspection if the county is an emissions county.
C. Refuse inspection and explain that no safety inspection sticker is required or issued.
CORRECT
D. Issue a one-year exemption sticker after verifying insurance.
RATIONALE: As of 2025, Texas eliminated the annual safety inspection sticker for
non-commercial vehicles in most counties; registration-based enforcement replaced it. Emissions
testing still applies only in designated counties for certain model years. Issuing a safety sticker
where none is authorized constitutes a violation.
Page 2
,Q2 APPLY TEXAS TRANSPORTATION CODE AND 37 TAC INSPECTION STANDARDS TO
DETERMINE PASS/FAIL/REJECT DECISIONS FOR COMPLEX VEHICLE CONDITIONS
During a brake inspection, a vehicle exhibits a brake pedal that sinks slowly to the
floor when held under steady pressure. Which condition does this most likely
indicate, and what is the correct disposition?
A. Normal operation; pass the vehicle.
B. Air in the hydraulic system or a fluid leak; reject the vehicle. CORRECT
C. Worn brake pads; advise repair but pass.
D. Faulty parking brake; reject only if parking brake fails.
RATIONALE: A sinking pedal under steady pressure indicates a hydraulic leak or internal master
cylinder bypass, a critical safety defect. Texas inspection standards require rejection because
service brake performance is compromised. Normal operation would hold firm pressure; worn
pads alone do not cause a sinking pedal.
Q3 APPLY TEXAS TRANSPORTATION CODE AND 37 TAC INSPECTION STANDARDS TO
DETERMINE PASS/FAIL/REJECT DECISIONS FOR COMPLEX VEHICLE CONDITIONS
Which of the following best describes the Texas rule regarding inspection station
signage and certificate security?
A. Signage is optional if the station is mobile.
B. Certificates must be stored in a locked container, and signage must display the station's
certificate number. CORRECT
C. Certificates may be pre-signed by the station owner for inspector convenience.
D. Signage must be in English only.
RATIONALE: Texas DPS requires secure storage of inspection certificates and public display of
the station's certificate number. Pre-signing certificates is prohibited and constitutes fraud.
Signage requirements do not mandate English-only, and mobile stations must still comply with
signage rules.
Page 3
, Q4 APPLY TEXAS TRANSPORTATION CODE AND 37 TAC INSPECTION STANDARDS TO
DETERMINE PASS/FAIL/REJECT DECISIONS FOR COMPLEX VEHICLE CONDITIONS
A vehicle's headlamps are aimed such that the high beam is 4 inches above
horizontal at 25 feet. According to Texas inspection specifications, what is the
correct action?
A. Pass; aim is within tolerance.
B. Reject; high beam must be aimed below horizontal. CORRECT
C. Pass if low beam is correctly aimed.
D. Reject only if glare is reported by other drivers.
RATIONALE: Texas requires headlamp aim within specified limits: high beam should be aimed
slightly below horizontal or within a tolerance that prevents glare. A 4-inch rise at 25 feet exceeds
allowable upward aim, causing glare and failing inspection. Low beam aim does not excuse high
beam misalignment.
Q5 APPLY TEXAS TRANSPORTATION CODE AND 37 TAC INSPECTION STANDARDS TO
DETERMINE PASS/FAIL/REJECT DECISIONS FOR COMPLEX VEHICLE CONDITIONS
Which of the following is a valid reason to reject a vehicle during a Texas safety
inspection for window tint?
A. Tint on rear side windows is darker than 35% VLT.
B. Tint on front side windows is darker than 25% VLT.
C. Tint on windshield extends below the AS-1 line.
D. All of the above. CORRECT
RATIONALE: Texas tint laws: front side windows must allow 25% VLT, rear side windows 25% if
no rearview mirror, windshield tint must not extend below AS-1 line and must be 25% VLT. Any
violation is a rejection. Thus all listed conditions are grounds for rejection.
Page 4
