TCFP DRIVER OP STANDARD EXAMS ANSWERS AND
QUESTIONS SET A+
✔✔A primed pump will have ________________ inside the pump. - ✔✔no air
✔✔As a guideline, sprinkler systems should be pumped at a pressure of__________
unless other specific information is available. - ✔✔150 psi
✔✔Which of the following devices attaches to an electrical cord to allow multiple power
operated tools to be supplied by that single electrical cord? - ✔✔Junction Box
✔✔Which of the following types of hydraulic tools has at lest one moveable arm that
opens to move material? - ✔✔Spreaders
✔✔True or False? Deploying the hose in an "S shape" is the best approach, as it will
both decrease the chance of blocking the road and minimize or eliminate any kinks in
the hose. - ✔✔True
✔✔Which of the following components of an automatic load management system
deactivates unnecessary electrical loads in order of necessity to prevent damage to the
system? - ✔✔Load shedding
✔✔An appliance that converts 12-volt DC from a vehicles electrical system to 110-volt
AC power. - ✔✔Inverter
✔✔A device that attaches to an electrical cord to provide additional outlets. -
✔✔Junction Box
✔✔A component designed to prevent any additional electrical loads from exceeding the
apparatus electrical system's capabilities. - ✔✔Load Monitor
, ✔✔A component that deactivates unnecessary electrical loads in order of necessity and
thereby prevents damage to the electrical system. - ✔✔Load shedding
✔✔A device that coverts the fluid pressure in a hydraulic rescue tool system into a
mechanical force. - ✔✔Actuator
✔✔A system designed to protect the electrical system from needless damage while
maintaining the operation of essential devices. - ✔✔Automatic load management
system
✔✔A component that activates electrical loads in a specific order to prevent overloading
the electrical system. - ✔✔Load Sequencer
✔✔The ______________ hose lay allows the engine company to establish a water
supply without assistance from an additional company. - ✔✔Forward
✔✔Which type of standpipe depends upon the fire dept to provide all of the water? -
✔✔Dry
✔✔Which of the following generators can produce 25 kilowatts or more of power? -
✔✔Transmission- driven generator
✔✔Which of the following lighting systems can be operated above most obstacles to
provide the desired on- scene lighting? - ✔✔Tower lights
✔✔What size and type of connections are found on a fire dept connection? - ✔✔Two
2.5 female connections
✔✔What is the correct term for laying supply lines in two different directions to establish
a water source? - ✔✔Split hose lay
✔✔Which of the following types of hydraulic tools has at least one moveable blade used
to cut, shear, or sever material? - ✔✔Cutters
✔✔A prime mover and the principal power output device used to power a rescue tool. -
✔✔power unit
✔✔A powered rescue tool with a piston or other type extender that generates extending
forces or both extending and retracting forces. - ✔✔Extension Ram
✔✔A powered rescue tool with at least one moveable blade that is used to cut, shear,
or sever material. - ✔✔Cutter
QUESTIONS SET A+
✔✔A primed pump will have ________________ inside the pump. - ✔✔no air
✔✔As a guideline, sprinkler systems should be pumped at a pressure of__________
unless other specific information is available. - ✔✔150 psi
✔✔Which of the following devices attaches to an electrical cord to allow multiple power
operated tools to be supplied by that single electrical cord? - ✔✔Junction Box
✔✔Which of the following types of hydraulic tools has at lest one moveable arm that
opens to move material? - ✔✔Spreaders
✔✔True or False? Deploying the hose in an "S shape" is the best approach, as it will
both decrease the chance of blocking the road and minimize or eliminate any kinks in
the hose. - ✔✔True
✔✔Which of the following components of an automatic load management system
deactivates unnecessary electrical loads in order of necessity to prevent damage to the
system? - ✔✔Load shedding
✔✔An appliance that converts 12-volt DC from a vehicles electrical system to 110-volt
AC power. - ✔✔Inverter
✔✔A device that attaches to an electrical cord to provide additional outlets. -
✔✔Junction Box
✔✔A component designed to prevent any additional electrical loads from exceeding the
apparatus electrical system's capabilities. - ✔✔Load Monitor
, ✔✔A component that deactivates unnecessary electrical loads in order of necessity and
thereby prevents damage to the electrical system. - ✔✔Load shedding
✔✔A device that coverts the fluid pressure in a hydraulic rescue tool system into a
mechanical force. - ✔✔Actuator
✔✔A system designed to protect the electrical system from needless damage while
maintaining the operation of essential devices. - ✔✔Automatic load management
system
✔✔A component that activates electrical loads in a specific order to prevent overloading
the electrical system. - ✔✔Load Sequencer
✔✔The ______________ hose lay allows the engine company to establish a water
supply without assistance from an additional company. - ✔✔Forward
✔✔Which type of standpipe depends upon the fire dept to provide all of the water? -
✔✔Dry
✔✔Which of the following generators can produce 25 kilowatts or more of power? -
✔✔Transmission- driven generator
✔✔Which of the following lighting systems can be operated above most obstacles to
provide the desired on- scene lighting? - ✔✔Tower lights
✔✔What size and type of connections are found on a fire dept connection? - ✔✔Two
2.5 female connections
✔✔What is the correct term for laying supply lines in two different directions to establish
a water source? - ✔✔Split hose lay
✔✔Which of the following types of hydraulic tools has at least one moveable blade used
to cut, shear, or sever material? - ✔✔Cutters
✔✔A prime mover and the principal power output device used to power a rescue tool. -
✔✔power unit
✔✔A powered rescue tool with a piston or other type extender that generates extending
forces or both extending and retracting forces. - ✔✔Extension Ram
✔✔A powered rescue tool with at least one moveable blade that is used to cut, shear,
or sever material. - ✔✔Cutter
