• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 2 fuera de 9 páginas
Examen

Engineering Circuit Analysis

Document preview thumbnail
Vista previa 2 fuera de 9 páginas

Engineering Circuit Analysis

Vista previa del contenido

Engineering Circuit Analysis
1. Nodal Analysis: Choose one node as the reference node, and all the other node voltages are defined with
respect to that node. This node also called ground because it has zero potential
2. The value of nodal analysis: once we know nodal voltages we can calculate current, power absorbed
or supplied by any element
3. How does current flow with respect to Voltage?: Current will flow from the node of higher
potential to the node of lower potential.
4. How many linearly independent equation do we need to solve KCL complete-
ly?: N - 1 equation.
5. There are 3 ways to solve KCL: 1. Matlab
2. Gaussian elimination
3. Matrix analysis
6. Ohm's Law: V=IR, GV = I, where G is inductance




7. Matrix Analysis equation: If general form of equation, GV = I
Then , solution will be V = (G^-1)I
8. Matrix Analysis the inverse of G: |G| is determinant


9. The node equation for networks containing only resistors and i ndependent
current sources can be written in .: symmetrical from
10. What is inspection KCL?: In general, if KCL is applied to node j with node voltage v_j , the coeflcient of
v_j is the sum of all the conductances connected to node j and the coeflcients of the other node voltages (e.g., v_j−1,
v_j+1) are the negative of the sum of the conductances connected directly between these nodes and node j. The
right-hand side of the equation is equal to the sum of the currents entering the node via current sources. Therefore,
the left-hand side of the equation represents the sum of the currents leaving node j and the right-hand side of the
equation represents the currents entering node j.
11. Nodal Analysis's omh's law: I = (Vm - Vn) / R
Vm and Vn has to be measured with respect to the same point, that is ground. All the nonreferenc e nodes are
1/9

, measured with respect to only one reference node.
12. If circuit contain dependent source: Then symmetrical condition will not work.




2/9

Información del documento

Subido en
18 de septiembre de 2026
Número de páginas
9
Escrito en
2026/2027
Tipo
Examen
Contiene
Preguntas y respuestas
$12.49

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Vendido
0
Seguidores
0
Artículos
152
Última venta
-



Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes