NYC High pressure stationary engineer
exam
A heater for either liquid fuels or different liquids dangerous to the boiler shall not be
established? - ANS-Directly inside the steam or water space within a boiler
At what strain is it required to have extra heavy valves set up? - ANS-a hundred pig
Gas fired Boilers not exceeding a hundred square feet of heating floor shall be supplied with a?
- ANS-single or double cone sort of hood diverter inside the stack (Check codes usually)
How is a gage included from excessive pressure? - ANS-close off cock (valve)
How is the principle steam strain gages tested? - ANS-With an insopectors gage
How lengthy must a hydronic gadget be pressure examined for? - ANS-Be no longer much less
than 2 hours at no less than 100 psig
How many brass washout plugs does a minature boiler have? - ANS-Not less than three brass
washout plugs 1" in size iron pipe size
How many safety vlaves does a boiler have with over 500 square ft of heating surface? - ANS-2
How frequently is HP piping expansion joints inspected? - ANS-month-to-month
How have to a far off disconnect be classified? - ANS-Remote manage for burner
Hydronic piping joints between metallic tubing and fittings will be? - ANS-Mechanical or welded
In hydronic piping systems where shall a shutoff valve be mounted? - ANS-Before and After the
stress decreasing valve (each sides)
Internal high stress inspection calls for the boiler to be __________,______________, and
_______________. - ANS-shutdown, drained, removal of hand and guy holes
No joints anchorage or guides shall be repaired or replaced or relocated with out a piece allow
issued byh the depth. This shall no longer practice to the repacking of a ___________ or
____________ joint. - ANS-Ball or slip
exam
A heater for either liquid fuels or different liquids dangerous to the boiler shall not be
established? - ANS-Directly inside the steam or water space within a boiler
At what strain is it required to have extra heavy valves set up? - ANS-a hundred pig
Gas fired Boilers not exceeding a hundred square feet of heating floor shall be supplied with a?
- ANS-single or double cone sort of hood diverter inside the stack (Check codes usually)
How is a gage included from excessive pressure? - ANS-close off cock (valve)
How is the principle steam strain gages tested? - ANS-With an insopectors gage
How lengthy must a hydronic gadget be pressure examined for? - ANS-Be no longer much less
than 2 hours at no less than 100 psig
How many brass washout plugs does a minature boiler have? - ANS-Not less than three brass
washout plugs 1" in size iron pipe size
How many safety vlaves does a boiler have with over 500 square ft of heating surface? - ANS-2
How frequently is HP piping expansion joints inspected? - ANS-month-to-month
How have to a far off disconnect be classified? - ANS-Remote manage for burner
Hydronic piping joints between metallic tubing and fittings will be? - ANS-Mechanical or welded
In hydronic piping systems where shall a shutoff valve be mounted? - ANS-Before and After the
stress decreasing valve (each sides)
Internal high stress inspection calls for the boiler to be __________,______________, and
_______________. - ANS-shutdown, drained, removal of hand and guy holes
No joints anchorage or guides shall be repaired or replaced or relocated with out a piece allow
issued byh the depth. This shall no longer practice to the repacking of a ___________ or
____________ joint. - ANS-Ball or slip
