NYC MASTER FIRE SUPPRESSION PIPING CONTRACTOR EXAM NEWEST
EVALUATED EXAM PRACTICE 100 QUESTIONS 2026-2027|ORIGINAL
QUESTIONS & ANSWERS |DETAILED RATIONALES |HINTED COMPLETE EXAM
PREP GRADED A+*INSTANT DOWNLOAD PDF*
1. Which minimum score is required to pass the NYC Master Fire
Suppression Piping Contractor written examination?
A) 60%
B) 65%
C) 70%
D) 75%
Answer: C) 70%
The written examination requires a passing score of 70 percent.
2. How many multiple-choice questions are contained in the Master Fire
Suppression Piping Contractor written examination?
A) 60
B) 70
C) 80
D) 100
Answer: C) 80
The Candidate Information Bulletin describes the examination as 80 multiple-
choice questions.
3. What is the time allowed for the written Master Fire Suppression Piping
Contractor examination?
A) 2 hours
B) 2½ hours
C) 3 hours
D) 4 hours
Answer: C) 3 hours
The examination is designed to be completed within three hours.
, 4. Which NYC agency is responsible for licensing Master Fire Suppression
Piping Contractors?
A) FDNY
B) Department of Environmental Protection
C) NYC Department of Buildings
D) Department of Transportation
Answer: C) NYC Department of Buildings
The Master Fire Suppression Piping Contractor license is administered by the
NYC Department of Buildings.
5. Under NYC Administrative Code requirements, who may perform fire
suppression piping work?
A) Any registered plumber
B) Any construction worker
C) A licensed Master Fire Suppression Piping Contractor or persons working
under the required supervision of one
D) Only an FDNY firefighter
Answer: C) A licensed Master Fire Suppression Piping Contractor or persons
working under the required supervision of one
NYC licensing provisions regulate who may perform fire suppression piping
work and require the appropriate licensed supervision.
6. Which of the following is specifically included within the scope of fire
suppression piping work?
A) Domestic kitchen plumbing
B) Natural gas piping
C) Installation of fire suppression piping systems
D) Installation of domestic water heaters
Answer: C) Installation of fire suppression piping systems
The MFSPC license concerns fire suppression piping work as defined by NYC
requirements; ordinary plumbing and gas work are separately regulated.
7. Which system is generally associated with piping that contains water
under normal conditions?
,A) Dry-pipe system
B) Wet-pipe sprinkler system
C) Deluge system
D) Empty standpipe
Answer: B) Wet-pipe sprinkler system
Wet-pipe systems normally contain water in the sprinkler piping, allowing
water discharge when a sprinkler operates.
8. What is the primary function of an automatic sprinkler?
A) Detect smoke only
B) Sound the building evacuation alarm manually
C) Discharge water when its operating element reaches its rated temperature
D) Supply water to a fire department hose
Answer: C) Discharge water when its operating element reaches its rated
temperature
An automatic sprinkler responds to heat and releases water through its
operating mechanism.
9. In a dry-pipe sprinkler system, what normally occupies the sprinkler
piping above the dry-pipe valve?
A) Water
B) Foam concentrate
C) Pressurized air or nitrogen
D) Carbon dioxide
Answer: C) Pressurized air or nitrogen
Dry-pipe systems use pressurized gas to hold the dry-pipe valve closed until a
sprinkler operates.
10.Which sprinkler system is designed so that water is not admitted into
the distribution piping until a detection or release condition occurs?
A) Wet-pipe
B) Preaction
C) Wet standpipe
D) Gravity tank
, Answer: B) Preaction
Preaction systems use a controlled release arrangement before water enters
portions of the sprinkler piping.
11.Which system generally allows water to discharge through all open
sprinklers when the system is actuated?
A) Wet-pipe
B) Dry-pipe
C) Deluge
D) Residential wet-pipe
Answer: C) Deluge
Deluge systems use open sprinklers or nozzles, with water admitted to the
system when the releasing system operates.
12.What is the principal purpose of a sprinkler control valve?
A) Increase building occupancy
B) Control the water supply to the sprinkler system
C) Measure room temperature
D) Drain the fire pump
Answer: B) Control the water supply to the sprinkler system
The control valve permits the system water supply to be opened, closed, and
controlled as required.
13.Why must a sprinkler control valve normally be maintained in the
correct open position?
A) To reduce pipe weight
B) To prevent alarm transmission
C) To ensure water can reach the sprinklers when needed
D) To increase air pressure
Answer: C) To ensure water can reach the sprinklers when needed
An improperly closed control valve can prevent or severely restrict water
delivery during a fire.
EVALUATED EXAM PRACTICE 100 QUESTIONS 2026-2027|ORIGINAL
QUESTIONS & ANSWERS |DETAILED RATIONALES |HINTED COMPLETE EXAM
PREP GRADED A+*INSTANT DOWNLOAD PDF*
1. Which minimum score is required to pass the NYC Master Fire
Suppression Piping Contractor written examination?
A) 60%
B) 65%
C) 70%
D) 75%
Answer: C) 70%
The written examination requires a passing score of 70 percent.
2. How many multiple-choice questions are contained in the Master Fire
Suppression Piping Contractor written examination?
A) 60
B) 70
C) 80
D) 100
Answer: C) 80
The Candidate Information Bulletin describes the examination as 80 multiple-
choice questions.
3. What is the time allowed for the written Master Fire Suppression Piping
Contractor examination?
A) 2 hours
B) 2½ hours
C) 3 hours
D) 4 hours
Answer: C) 3 hours
The examination is designed to be completed within three hours.
, 4. Which NYC agency is responsible for licensing Master Fire Suppression
Piping Contractors?
A) FDNY
B) Department of Environmental Protection
C) NYC Department of Buildings
D) Department of Transportation
Answer: C) NYC Department of Buildings
The Master Fire Suppression Piping Contractor license is administered by the
NYC Department of Buildings.
5. Under NYC Administrative Code requirements, who may perform fire
suppression piping work?
A) Any registered plumber
B) Any construction worker
C) A licensed Master Fire Suppression Piping Contractor or persons working
under the required supervision of one
D) Only an FDNY firefighter
Answer: C) A licensed Master Fire Suppression Piping Contractor or persons
working under the required supervision of one
NYC licensing provisions regulate who may perform fire suppression piping
work and require the appropriate licensed supervision.
6. Which of the following is specifically included within the scope of fire
suppression piping work?
A) Domestic kitchen plumbing
B) Natural gas piping
C) Installation of fire suppression piping systems
D) Installation of domestic water heaters
Answer: C) Installation of fire suppression piping systems
The MFSPC license concerns fire suppression piping work as defined by NYC
requirements; ordinary plumbing and gas work are separately regulated.
7. Which system is generally associated with piping that contains water
under normal conditions?
,A) Dry-pipe system
B) Wet-pipe sprinkler system
C) Deluge system
D) Empty standpipe
Answer: B) Wet-pipe sprinkler system
Wet-pipe systems normally contain water in the sprinkler piping, allowing
water discharge when a sprinkler operates.
8. What is the primary function of an automatic sprinkler?
A) Detect smoke only
B) Sound the building evacuation alarm manually
C) Discharge water when its operating element reaches its rated temperature
D) Supply water to a fire department hose
Answer: C) Discharge water when its operating element reaches its rated
temperature
An automatic sprinkler responds to heat and releases water through its
operating mechanism.
9. In a dry-pipe sprinkler system, what normally occupies the sprinkler
piping above the dry-pipe valve?
A) Water
B) Foam concentrate
C) Pressurized air or nitrogen
D) Carbon dioxide
Answer: C) Pressurized air or nitrogen
Dry-pipe systems use pressurized gas to hold the dry-pipe valve closed until a
sprinkler operates.
10.Which sprinkler system is designed so that water is not admitted into
the distribution piping until a detection or release condition occurs?
A) Wet-pipe
B) Preaction
C) Wet standpipe
D) Gravity tank
, Answer: B) Preaction
Preaction systems use a controlled release arrangement before water enters
portions of the sprinkler piping.
11.Which system generally allows water to discharge through all open
sprinklers when the system is actuated?
A) Wet-pipe
B) Dry-pipe
C) Deluge
D) Residential wet-pipe
Answer: C) Deluge
Deluge systems use open sprinklers or nozzles, with water admitted to the
system when the releasing system operates.
12.What is the principal purpose of a sprinkler control valve?
A) Increase building occupancy
B) Control the water supply to the sprinkler system
C) Measure room temperature
D) Drain the fire pump
Answer: B) Control the water supply to the sprinkler system
The control valve permits the system water supply to be opened, closed, and
controlled as required.
13.Why must a sprinkler control valve normally be maintained in the
correct open position?
A) To reduce pipe weight
B) To prevent alarm transmission
C) To ensure water can reach the sprinklers when needed
D) To increase air pressure
Answer: C) To ensure water can reach the sprinklers when needed
An improperly closed control valve can prevent or severely restrict water
delivery during a fire.
