NEIEP 200 Final Exam 2025 | Featuring Fundamental Elevator Construction
Concepts Such as Electrical Theory, Mechanical Systems, Safety Protocols,
Blueprint Reading, and Basic Installation Procedures | Verified Answers
Which of the following is a term used to describe a body harness used in conjunction with a shock
absorbing lanyard? - (CORRECT ANSWER)Personal fall arrest system
A mechanic is working on a construction job, and finds the carpenter using a powder activated tool to
anchor wall track. Of the following, which precaution should the mechanic take? - (CORRECT
ANSWER)Wear hearing protection
Which is the best way to communicate with your coworkers while you are in the machine room and they
are working in the pit? - (CORRECT ANSWER)Two-way radio
A mechanic hurts their back while lifting a heavy box. A doctor diagnoses a "strain". What type of Injury
did they sustain? - (CORRECT ANSWER)Muscle stretched beyond limits
You are about to step to a car top. After activating the top of car stop switch and the inspection switch,
what is the next step to verify that they work? - (CORRECT ANSWER)Close the hoist way doors and set
up a hall call
What safety device might you encounter in a hydraulic elevator pit? - (CORRECT ANSWER)Plunger
gripper
What is the most serious consequence of incorrect lifting? - (CORRECT ANSWER)Spinal injury
What is called the "silent killer" - (CORRECT ANSWER)The counter weight
A mechanic needs to ride on the car top, but a top-of car operating device is not available. What should
the mechanic do? - (CORRECT ANSWER)Establish communication with a qualified person in the car
, 2
You are about to perform routine maintenance on an elevator. After applying a lock and a tag, what step
should you take? - (CORRECT ANSWER)Verify no power with appropriate test equipment
When does ASME A17.1 require a pit ladder to be installed? - (CORRECT ANSWER)When pit depth
exceeds 35"
A mechanic is taking a trouble call in a dumbwaiter, and realizes he must stand on the car top, what
should the dumbwaiter be equipped with? - (CORRECT ANSWER)Car safeties
When working around electricity, which of the following safety precautions should be followed? -
(CORRECT ANSWER)Remove jewelry and metal frames glasses
When are elevator constructors permitted to ride inside a 400lb. Capacity dumbwaiter - (CORRECT
ANSWER)They are not permitted to ride inside any dumbwaiter
Who is ultimately responsible for ensuring adequate lighting at a work site? - (CORRECT ANSWER)You
Your mechanic asks you to perform a job site inspection and you find a serious OSHA violation. Who
would you notify first? - (CORRECT ANSWER)Your mechanic
What are the two most common causes of accidents to members of the general public on elevators? -
(CORRECT ANSWER)Trips and falls, and being struck by the doors
Before shortening a governor rope, what safety steps should be taken? - (CORRECT ANSWER)LOTO and
support tension sheave
You aren't sure if a particular hoistway is considered a permit-required confined space. Where can you
find more information? - (CORRECT ANSWER)OSHA 29 CFR 1926 code
, 3
You arrive at the machine room to replace a thrust bearing and find the lights are not working. What
should you do? - (CORRECT ANSWER)Do not start work until the lighting is restored
After locking out and tagging out the electrical system, what safety step must be taken before entering
an escalator truss? - (CORRECT ANSWER)Install a mechanical lock
A mechanic is about to lubricate a governor tension sheave in a traction elevator pit. Before beginning
work, what must be done? - (CORRECT ANSWER)Lock out and tag out
An elevator constructor is asked to check on something in the pit. When must barriers be installed? -
(CORRECT ANSWER)When hoistway door will be open more than 5"
When is public safety an elevator constructors responsibility? - (CORRECT ANSWER)During all work-
related activities
When carrying a screwdriver in your pocket on a car top, what safety factors must be considered? -
(CORRECT ANSWER)It doesn't matter; you should never carry a screw driver in your pocket
You are ordering wood planking to provide overhead protection for a temporary working platform. At a
minimum, how thick must the wood be? - (CORRECT ANSWER)2"
Which organization' s code prohibits storing anything on top of the car? - (CORRECT ANSWER)ASME
You are modernizing an elevator where the Public is present. What are the barricade requirements? -
(CORRECT ANSWER)Solid barricade at least 8' high, fully enclosing the work area
Concepts Such as Electrical Theory, Mechanical Systems, Safety Protocols,
Blueprint Reading, and Basic Installation Procedures | Verified Answers
Which of the following is a term used to describe a body harness used in conjunction with a shock
absorbing lanyard? - (CORRECT ANSWER)Personal fall arrest system
A mechanic is working on a construction job, and finds the carpenter using a powder activated tool to
anchor wall track. Of the following, which precaution should the mechanic take? - (CORRECT
ANSWER)Wear hearing protection
Which is the best way to communicate with your coworkers while you are in the machine room and they
are working in the pit? - (CORRECT ANSWER)Two-way radio
A mechanic hurts their back while lifting a heavy box. A doctor diagnoses a "strain". What type of Injury
did they sustain? - (CORRECT ANSWER)Muscle stretched beyond limits
You are about to step to a car top. After activating the top of car stop switch and the inspection switch,
what is the next step to verify that they work? - (CORRECT ANSWER)Close the hoist way doors and set
up a hall call
What safety device might you encounter in a hydraulic elevator pit? - (CORRECT ANSWER)Plunger
gripper
What is the most serious consequence of incorrect lifting? - (CORRECT ANSWER)Spinal injury
What is called the "silent killer" - (CORRECT ANSWER)The counter weight
A mechanic needs to ride on the car top, but a top-of car operating device is not available. What should
the mechanic do? - (CORRECT ANSWER)Establish communication with a qualified person in the car
, 2
You are about to perform routine maintenance on an elevator. After applying a lock and a tag, what step
should you take? - (CORRECT ANSWER)Verify no power with appropriate test equipment
When does ASME A17.1 require a pit ladder to be installed? - (CORRECT ANSWER)When pit depth
exceeds 35"
A mechanic is taking a trouble call in a dumbwaiter, and realizes he must stand on the car top, what
should the dumbwaiter be equipped with? - (CORRECT ANSWER)Car safeties
When working around electricity, which of the following safety precautions should be followed? -
(CORRECT ANSWER)Remove jewelry and metal frames glasses
When are elevator constructors permitted to ride inside a 400lb. Capacity dumbwaiter - (CORRECT
ANSWER)They are not permitted to ride inside any dumbwaiter
Who is ultimately responsible for ensuring adequate lighting at a work site? - (CORRECT ANSWER)You
Your mechanic asks you to perform a job site inspection and you find a serious OSHA violation. Who
would you notify first? - (CORRECT ANSWER)Your mechanic
What are the two most common causes of accidents to members of the general public on elevators? -
(CORRECT ANSWER)Trips and falls, and being struck by the doors
Before shortening a governor rope, what safety steps should be taken? - (CORRECT ANSWER)LOTO and
support tension sheave
You aren't sure if a particular hoistway is considered a permit-required confined space. Where can you
find more information? - (CORRECT ANSWER)OSHA 29 CFR 1926 code
, 3
You arrive at the machine room to replace a thrust bearing and find the lights are not working. What
should you do? - (CORRECT ANSWER)Do not start work until the lighting is restored
After locking out and tagging out the electrical system, what safety step must be taken before entering
an escalator truss? - (CORRECT ANSWER)Install a mechanical lock
A mechanic is about to lubricate a governor tension sheave in a traction elevator pit. Before beginning
work, what must be done? - (CORRECT ANSWER)Lock out and tag out
An elevator constructor is asked to check on something in the pit. When must barriers be installed? -
(CORRECT ANSWER)When hoistway door will be open more than 5"
When is public safety an elevator constructors responsibility? - (CORRECT ANSWER)During all work-
related activities
When carrying a screwdriver in your pocket on a car top, what safety factors must be considered? -
(CORRECT ANSWER)It doesn't matter; you should never carry a screw driver in your pocket
You are ordering wood planking to provide overhead protection for a temporary working platform. At a
minimum, how thick must the wood be? - (CORRECT ANSWER)2"
Which organization' s code prohibits storing anything on top of the car? - (CORRECT ANSWER)ASME
You are modernizing an elevator where the Public is present. What are the barricade requirements? -
(CORRECT ANSWER)Solid barricade at least 8' high, fully enclosing the work area
