Collection Systems Maintenance | Practice Questions, Correct Answers &
Detailed Explanations | Wastewater Certification Exam Prep
Features
✓ CWEA Grade 3 practice questions
✓ Collections System Maintenance review
✓ Correct answers
✓ Detailed explanations
✓ Exam-focused wastewater terminology
, CWEA Collection Systems Maintenance | Practice
Questions, Correct Answers & Detailed Explanations |
Wastewater Certification Exam Prep
Question 1
Why are gasoline and volatile solvents objectionable when present in
a sewer?
A. They cause pipe corrosion
B. They produce an explosion hazard
C. They create unpleasant odors
D. They damage treatment plant equipment
Correct Answer: B. They produce an explosion hazard
Rationale: Gasoline and volatile solvents produce flammable vapors that
can create explosive mixtures in sewers. These vapors can be ignited by
sparks from electrical equipment, static electricity, or other ignition sources.
This presents a serious safety risk to workers and the public.
Question 2
,You should never attempt to install, maintain, repair or replace
electrical equipment panels, controls, wiring or circuits unless:
A. You have read the manual
B. You know what you are doing, are qualified and are authorized
C. You have a co-worker present
D. You have notified your supervisor
Correct Answer: B. You know what you are doing, are qualified and are
authorized
Rationale: Electrical work requires specific knowledge, skills, and
qualifications to prevent serious injury or death from electrical shock, arc
flash, or other hazards. Authorization ensures that the work is approved
and that proper safety protocols are followed. The other options do not
address the essential requirements of competence and authorization.
Question 3
What are the different areas of traffic zones?
A. Warning Area, Work Area, Termination Area
B. Advance Warning Area, Transition Area, Activity Area (buffer space and
work space), Termination Area
C. Approach Area, Work Zone, Exit Area
D. Warning Zone, Transition Zone, Activity Zone
, Correct Answer: B. Advance Warning Area, Transition Area, Activity
Area (buffer space and work space), Termination Area
Rationale: Traffic control zones are divided into four distinct areas
according to the Manual on Uniform Traffic Control Devices (MUTCD): the
Advance Warning Area (alerts traffic to upcoming work), the Transition Area
(moves traffic out of normal path), the Activity Area (where the work occurs,
including buffer space and work space), and the Termination Area (returns
traffic to normal path). Understanding these zones is essential for safe
traffic control setup.
Question 4
Why should hydrogen sulfide be controlled?
A. To improve taste of water
B. To protect from corrosion and odors
C. To increase flow velocity
D. To reduce biological activity
Correct Answer: B. To protect from corrosion and odors
Rationale: Hydrogen sulfide (H₂S) is corrosive and causes damage to
pipes, manholes, and other sewer infrastructure. It also produces a
characteristic "rotten egg" odor that is offensive to the public and workers.
Controlling H₂S is essential to preserve infrastructure and prevent