Page 1 of 54
NYC BUILDINGS CRANE INSPECTION CERTIFICATION
EXAM – BASED ON NYC DOB REQUIREMENTS, OSHA 1926
SUBPART CC & NYC BUILDING CODE CHAPTER 33
2026/2027 COMPLETE (150) CURRENT TESTING
QUESTIONS AND CORRECT ANSWERS WITH DETAILED
RATIONALES.
BUILDINGS
Prepare effectively for the NYC Buildings Crane Inspection Certification Exam Practice
with this focused study resource. It supports review of crane components, inspection
procedures, operational safety, documentation, maintenance requirements, and
applicable NYC building regulations. Use the material to reinforce your technical
knowledge, review key topics, and identify areas that may require additional study.
This resource is suited for crane inspectors, construction professionals, safety
personnel, and candidates preparing for NYC crane inspection certification.
MULTIPLE CHOICE.
SECTION 1: REGULATORY & LICENSING REQUIREMENTS (Questions 1–20)
Question 1:
Under New York City Administrative Code §28-408.4, what is the minimum age
requirement to apply for a crane operator license?
A) 18 years
B) 21 years
C) 25 years
D) No minimum age, only experience required
Answer: B
Rationale: NYC Administrative Code §28-408.4 explicitly requires that
applicants for a crane operator license be at least 21 years of age. This is
stricter than some other jurisdictions and is intended to ensure a level of
maturity and responsibility given the high-risk nature of crane operations in
dense urban environments.
, Page 2 of 54
Question 2:
Which NYC agency is primarily responsible for licensing crane operators and
overseeing crane operations?
A) FDNY (Fire Department of New York)
B) NYPD (New York Police Department)
C) DOB (Department of Buildings)
D) DOT (Department of Transportation)
Answer: C
Rationale: The NYC Department of Buildings (DOB) is responsible for crane
safety inspections, licensing, and enforcement of relevant codes. OSHA sets
federal standards, but DOB enforces NYC-specific regulations.
Question 3:
Under NYC Building Code Chapter 33, what credential must a crane operator
possess?
A) A valid driver's license
B) A site manager's approval only
C) A valid NYC Tower Crane Operator License
D) OSHA certification only
Answer: C
Rationale: NYC law requires operators to hold a specific license issued by the
NYC Department of Buildings.
Question 4:
How often must a crane operator license be renewed in NYC?
A) Annually
B) Biennially (every 2 years)
C) Every 3 years
D) Every 5 years
, Page 3 of 54
Answer: B
Rationale: Crane operator licenses in NYC must be renewed biennially (every
2 years). Operators must also complete Department-approved recertification
courses.
Question 5:
According to NYC Building Code Chapter 33, what is the minimum distance a
crane must maintain from energized power lines rated up to 50kV if the
voltage is not known?
A) 10 feet
B) 15 feet
C) 20 feet
D) 50 feet
Answer: C
Rationale: OSHA and NYC regulations require a minimum clearance of 20
feet for power lines up to 350kV when voltage is not verified to prevent
accidental electrical arcing.
Question 6:
What is the minimum passing score for the Master Rigger written
examination?
A) 60% (45 of 75)
B) 70% (53 of 75)
C) 75% (56 of 75)
D) 80% (60 of 75)
Answer: B
Rationale: The Master Rigger written examination consists of 75 questions
with a minimum passing score of 53 correct answers, which is 70%.
, Page 4 of 54
Question 7:
How many hours of training are required for a Master Rigger license applicant?
A) 8 hours
B) 16 hours
C) 30 hours
D) 40 hours
Answer: C
Rationale: An applicant for a Master Rigger license must successfully
complete a Department-approved training course of not less than 30 hours,
including instruction on inspection, maintenance, repair, use, installation,
and hazards.
Question 8:
Which federal regulation governs crane and derrick safety in construction?
A) OSHA 1926 Subpart CC
B) OSHA 1910 Subpart N
C) ANSI B30.5
D) ASME B30.2
Answer: A
Rationale: OSHA 1926 Subpart CC (Cranes and Derricks in Construction)
establishes the federal safety standards for crane operations.
Question 9:
What is the time limit for the Master Rigger written examination?
A) 2 hours
B) 3 hours
C) 4 hours
D) No time limit
NYC BUILDINGS CRANE INSPECTION CERTIFICATION
EXAM – BASED ON NYC DOB REQUIREMENTS, OSHA 1926
SUBPART CC & NYC BUILDING CODE CHAPTER 33
2026/2027 COMPLETE (150) CURRENT TESTING
QUESTIONS AND CORRECT ANSWERS WITH DETAILED
RATIONALES.
BUILDINGS
Prepare effectively for the NYC Buildings Crane Inspection Certification Exam Practice
with this focused study resource. It supports review of crane components, inspection
procedures, operational safety, documentation, maintenance requirements, and
applicable NYC building regulations. Use the material to reinforce your technical
knowledge, review key topics, and identify areas that may require additional study.
This resource is suited for crane inspectors, construction professionals, safety
personnel, and candidates preparing for NYC crane inspection certification.
MULTIPLE CHOICE.
SECTION 1: REGULATORY & LICENSING REQUIREMENTS (Questions 1–20)
Question 1:
Under New York City Administrative Code §28-408.4, what is the minimum age
requirement to apply for a crane operator license?
A) 18 years
B) 21 years
C) 25 years
D) No minimum age, only experience required
Answer: B
Rationale: NYC Administrative Code §28-408.4 explicitly requires that
applicants for a crane operator license be at least 21 years of age. This is
stricter than some other jurisdictions and is intended to ensure a level of
maturity and responsibility given the high-risk nature of crane operations in
dense urban environments.
, Page 2 of 54
Question 2:
Which NYC agency is primarily responsible for licensing crane operators and
overseeing crane operations?
A) FDNY (Fire Department of New York)
B) NYPD (New York Police Department)
C) DOB (Department of Buildings)
D) DOT (Department of Transportation)
Answer: C
Rationale: The NYC Department of Buildings (DOB) is responsible for crane
safety inspections, licensing, and enforcement of relevant codes. OSHA sets
federal standards, but DOB enforces NYC-specific regulations.
Question 3:
Under NYC Building Code Chapter 33, what credential must a crane operator
possess?
A) A valid driver's license
B) A site manager's approval only
C) A valid NYC Tower Crane Operator License
D) OSHA certification only
Answer: C
Rationale: NYC law requires operators to hold a specific license issued by the
NYC Department of Buildings.
Question 4:
How often must a crane operator license be renewed in NYC?
A) Annually
B) Biennially (every 2 years)
C) Every 3 years
D) Every 5 years
, Page 3 of 54
Answer: B
Rationale: Crane operator licenses in NYC must be renewed biennially (every
2 years). Operators must also complete Department-approved recertification
courses.
Question 5:
According to NYC Building Code Chapter 33, what is the minimum distance a
crane must maintain from energized power lines rated up to 50kV if the
voltage is not known?
A) 10 feet
B) 15 feet
C) 20 feet
D) 50 feet
Answer: C
Rationale: OSHA and NYC regulations require a minimum clearance of 20
feet for power lines up to 350kV when voltage is not verified to prevent
accidental electrical arcing.
Question 6:
What is the minimum passing score for the Master Rigger written
examination?
A) 60% (45 of 75)
B) 70% (53 of 75)
C) 75% (56 of 75)
D) 80% (60 of 75)
Answer: B
Rationale: The Master Rigger written examination consists of 75 questions
with a minimum passing score of 53 correct answers, which is 70%.
, Page 4 of 54
Question 7:
How many hours of training are required for a Master Rigger license applicant?
A) 8 hours
B) 16 hours
C) 30 hours
D) 40 hours
Answer: C
Rationale: An applicant for a Master Rigger license must successfully
complete a Department-approved training course of not less than 30 hours,
including instruction on inspection, maintenance, repair, use, installation,
and hazards.
Question 8:
Which federal regulation governs crane and derrick safety in construction?
A) OSHA 1926 Subpart CC
B) OSHA 1910 Subpart N
C) ANSI B30.5
D) ASME B30.2
Answer: A
Rationale: OSHA 1926 Subpart CC (Cranes and Derricks in Construction)
establishes the federal safety standards for crane operations.
Question 9:
What is the time limit for the Master Rigger written examination?
A) 2 hours
B) 3 hours
C) 4 hours
D) No time limit
