J STD 001 EXAM SCRIPT TESTED QUESTIONS
FULL SOLUTION PREMIUM STUDY
MATERIAL
●● What is the proper preparation and safe maintenance of the soldering
iron? (an all above answer)
Answer: - The soldering iron should be checked
to ensure the tip is fully inserted and
there is no damage.
- Solder should be applied to the tip when
the iron is not in use to prevent tip
oxidation.
- Ensure iron tip is the correct size for
connection to be soldered.
- Check and verify that the ESD Protection
date on the power supply and the iron has
not expired
●● DO NOT heat solder above
Answer: 850°F - Overheated solder can release lead fumes
●● What type of maintenance is required at work stations?
, Answer: - Work surfaces must be uncluttered, organized, & free of
Foreign
Object Debris (FOD), such as lead clippings, solder balls,
contamination, etc.
●● When ESD protection is required:
Answer: - Verify ESD labels on benches, monitors and ionizers.
- Report expired or missing labels immediately.
- Follow all SD requirements.
●● Electronic Safe Static Work Station (SSWS) & Solder Irons
Answer: Always check the label to be sure:
- the date is current
- there is a procedure number
- the information is legible
●● Always Follow Steps In Process Instructions
Answer: Do not go out of sequence unless specifically documented in
the process instructions
●● What is the heat bridge technique used during the hand soldering
process?
FULL SOLUTION PREMIUM STUDY
MATERIAL
●● What is the proper preparation and safe maintenance of the soldering
iron? (an all above answer)
Answer: - The soldering iron should be checked
to ensure the tip is fully inserted and
there is no damage.
- Solder should be applied to the tip when
the iron is not in use to prevent tip
oxidation.
- Ensure iron tip is the correct size for
connection to be soldered.
- Check and verify that the ESD Protection
date on the power supply and the iron has
not expired
●● DO NOT heat solder above
Answer: 850°F - Overheated solder can release lead fumes
●● What type of maintenance is required at work stations?
, Answer: - Work surfaces must be uncluttered, organized, & free of
Foreign
Object Debris (FOD), such as lead clippings, solder balls,
contamination, etc.
●● When ESD protection is required:
Answer: - Verify ESD labels on benches, monitors and ionizers.
- Report expired or missing labels immediately.
- Follow all SD requirements.
●● Electronic Safe Static Work Station (SSWS) & Solder Irons
Answer: Always check the label to be sure:
- the date is current
- there is a procedure number
- the information is legible
●● Always Follow Steps In Process Instructions
Answer: Do not go out of sequence unless specifically documented in
the process instructions
●● What is the heat bridge technique used during the hand soldering
process?
