PMT 3600 exam 1 Question with correct
Answers
,"Service" describes maintenance actions taken to - CORRECT ANSrestore materials intended to be
consumed under normal operating conditions
Under "Reliability Centered Maintenance" (RCM), a system component with both High Probability and
High Severity of failure would be categorized as a ______ component. - CORRECT ANSPrevent
"Design for Maintainability" refers to the engineering objective of creating a system that - CORRECT
ANScan be easily restored to design specifications while in operation
According to the 2009 'Supply Chain: Problems and Solutions', OEMs are - CORRECT ANSDriving up the
cost or repair and overhaul because of their monopolistic nature
Jet engines are divided into two separate categories - CORRECT ANSTurbo shaft and Conventional
an MEL - CORRECT ANSAllows deferral of maintenance
The _________approach to maintenance is primarily used by airlines for their new aircraft - CORRECT
ANStask-oriented
Which of the following is NOT a source of structural deterioration - CORRECT ANSstress damage
The On-Condition (OC) Process requires that the item - CORRECT ANSBe periodically inspected or tested
against some appropriate physical standard
A _________ check requires specialized test equipment or tools for measurement. - CORRECT
ANSfunctional
When should the owner or operator apply Objective 4? - CORRECT ANSwhen a maintenance program or
mechanic's work cannot be improved
, The CQI concept in aviation - CORRECT ANSSeeks continuous quality improvement in aviation
What certificates are required for full aircraft certification? - CORRECT ANSType, production, &
airworthiness certificate
An MEL allows - CORRECT ANSAn aircraft to fly with certain items inoperative
Consolidating maintenance manuals such as the AMM, WDM, and FIM benefits airlines by - CORRECT
ANSReducing research time, and eliminating a source of possible safety violations
In the ATA handbook, maintenance manual information can be found in the same location regardless of
__________. - CORRECT ANSaircraft type
CASS is designed to - CORRECT ANSDetect and correct maintenance program deficiencies
According to Ops Specs, the airline is responsible for assuring airworthiness. This means that - CORRECT
ANSAn airline may hire another carrier or third party to perform maintenance under contract
The airline maintenance manual (as required by AC 120-16D) describes - CORRECT ANSHow
maintenance will be conducted and how the program will be monitored and improved
"On-Equipment" restoration activities can be classified as - CORRECT ANSTime Change, Condition
Monitor, and On Condition
A system that is rated as "Partially Mission Capable" is one that is currently - CORRECT ANSable to
perform some, but not all, of its intended purposes
Answers
,"Service" describes maintenance actions taken to - CORRECT ANSrestore materials intended to be
consumed under normal operating conditions
Under "Reliability Centered Maintenance" (RCM), a system component with both High Probability and
High Severity of failure would be categorized as a ______ component. - CORRECT ANSPrevent
"Design for Maintainability" refers to the engineering objective of creating a system that - CORRECT
ANScan be easily restored to design specifications while in operation
According to the 2009 'Supply Chain: Problems and Solutions', OEMs are - CORRECT ANSDriving up the
cost or repair and overhaul because of their monopolistic nature
Jet engines are divided into two separate categories - CORRECT ANSTurbo shaft and Conventional
an MEL - CORRECT ANSAllows deferral of maintenance
The _________approach to maintenance is primarily used by airlines for their new aircraft - CORRECT
ANStask-oriented
Which of the following is NOT a source of structural deterioration - CORRECT ANSstress damage
The On-Condition (OC) Process requires that the item - CORRECT ANSBe periodically inspected or tested
against some appropriate physical standard
A _________ check requires specialized test equipment or tools for measurement. - CORRECT
ANSfunctional
When should the owner or operator apply Objective 4? - CORRECT ANSwhen a maintenance program or
mechanic's work cannot be improved
, The CQI concept in aviation - CORRECT ANSSeeks continuous quality improvement in aviation
What certificates are required for full aircraft certification? - CORRECT ANSType, production, &
airworthiness certificate
An MEL allows - CORRECT ANSAn aircraft to fly with certain items inoperative
Consolidating maintenance manuals such as the AMM, WDM, and FIM benefits airlines by - CORRECT
ANSReducing research time, and eliminating a source of possible safety violations
In the ATA handbook, maintenance manual information can be found in the same location regardless of
__________. - CORRECT ANSaircraft type
CASS is designed to - CORRECT ANSDetect and correct maintenance program deficiencies
According to Ops Specs, the airline is responsible for assuring airworthiness. This means that - CORRECT
ANSAn airline may hire another carrier or third party to perform maintenance under contract
The airline maintenance manual (as required by AC 120-16D) describes - CORRECT ANSHow
maintenance will be conducted and how the program will be monitored and improved
"On-Equipment" restoration activities can be classified as - CORRECT ANSTime Change, Condition
Monitor, and On Condition
A system that is rated as "Partially Mission Capable" is one that is currently - CORRECT ANSable to
perform some, but not all, of its intended purposes
